This is openocd.info, produced by makeinfo version 4.13 from
openocd.texi.

INFO-DIR-SECTION Development
START-INFO-DIR-ENTRY
* OpenOCD: (openocd).      OpenOCD User's Guide
END-INFO-DIR-ENTRY


This User's Guide documents release 0.5.0, dated 9 August 2011, of the
Open On-Chip Debugger (OpenOCD).

   * Copyright (C) 2008 The OpenOCD Project

   * Copyright (C) 2007-2008 Spencer Oliver <spen@spen-soft.co.uk>

   * Copyright (C) 2008-2010 Oyvind Harboe <oyvind.harboe@zylin.com>

   * Copyright (C) 2008 Duane Ellis <openocd@duaneellis.com>

   * Copyright (C) 2009-2010 David Brownell

     Permission is granted to copy, distribute and/or modify this
     document under the terms of the GNU Free Documentation License,
     Version 1.2 or any later version published by the Free Software
     Foundation; with no Invariant Sections, with no Front-Cover Texts,
     and with no Back-Cover Texts.  A copy of the license is included
     in the section entitled "GNU Free Documentation License".


Indirect:
openocd.info-1: 1000
openocd.info-2: 296203

Tag Table:
(Indirect)
Node: Top1000
Node: About3453
Node: Developers7441
Node: Debug Adapter Hardware10142
Node: About Jim-Tcl18650
Node: Running20784
Node: OpenOCD Project Setup25649
Ref: OpenOCD Project Setup-Footnote-145467
Ref: OpenOCD Project Setup-Footnote-245804
Ref: OpenOCD Project Setup-Footnote-346069
Node: Config File Guidelines46394
Ref: Define CPU targets working in SMP65916
Ref: Translating Configuration Files71766
Ref: Config File Guidelines-Footnote-172987
Node: Daemon Configuration73059
Ref: Configuration Stage73381
Ref: TCP/IP Ports76680
Ref: GDB Configuration78933
Ref: gdb_breakpoint_override79217
Ref: gdb_flash_program79592
Ref: Event Polling80451
Node: Debug Adapter Configuration82873
Ref: JTAG Speed100072
Node: Reset Configuration103013
Ref: SRST and TRST Issues105920
Node: TAP Declaration117221
Ref: jtag newtap122633
Ref: TAP Events127167
Ref: Enabling and Disabling TAPs128666
Ref: Autoprobing131316
Ref: TAP Declaration-Footnote-1134006
Node: CPU Configuration134203
Ref: target types138327
Ref: Target Configuration140348
Ref: target curstate149067
Ref: Target Events150279
Node: Flash Commands155049
Ref: NOR Configuration156570
Ref: flash erase_sector160687
Ref: flash write_bank162394
Ref: flash write_image162618
Ref: flash protect164747
Ref: Flash Driver List165105
Ref: Flash Commands-Footnote-1191092
Ref: Flash Commands-Footnote-2191255
Node: NAND Flash Commands191417
Ref: NAND Configuration194386
Ref: NAND Driver List204752
Node: PLD/FPGA Commands208697
Node: General Commands210761
Ref: debug_level212704
Ref: Target State handling213630
Ref: Reset Command217286
Ref: Memory access219555
Ref: Image access221182
Ref: dump_image221239
Ref: load_image222219
Node: Architecture and Core Commands225522
Ref: ARM Hardware Tracing225992
Ref: Trace Port Drivers233897
Ref: arm7_9 fast_memory_access240487
Ref: arm9 vector_catch241796
Ref: xscale vector_catch250203
Ref: xscale vector_table250723
Ref: Software Debug Messages and Tracing256337
Node: JTAG Commands259790
Node: Boundary Scan Commands268250
Node: TFTP270700
Node: GDB and OpenOCD271572
Ref: Connecting to GDB272545
Ref: Using openocd SMP with GDB277745
Node: Tcl Scripting API279154
Node: FAQ281815
Ref: FAQ RTCK281925
Ref: FAQ TAP Order294431
Node: Tcl Crash Course296203
Node: License308205
Node: OpenOCD Concept Index330635
Node: Command and Driver Index346976

End Tag Table
