/* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated                           */
/*  All rights reserved.                                                        */
/*                                                                              */
/*  Redistribution and use in source and binary forms, with or without          */
/*  modification, are permitted provided that the following conditions          */
/*  are met:                                                                    */
/*                                                                              */
/*  *  Redistributions of source code must retain the above copyright           */
/*     notice, this list of conditions and the following disclaimer.            */
/*                                                                              */
/*  *  Redistributions in binary form must reproduce the above copyright        */
/*     notice, this list of conditions and the following disclaimer in the      */
/*     documentation and/or other materials provided with the distribution.     */
/*                                                                              */
/*  *  Neither the name of Texas Instruments Incorporated nor the names of      */
/*     its contributors may be used to endorse or promote products derived      */
/*     from this software without specific prior written permission.            */
/*                                                                              */
/*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/*  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,       */
/*  THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR      */
/*  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR            */
/*  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,       */
/*  EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,         */
/*  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/*  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,    */
/*  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR     */
/*  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,              */
/*  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                          */
/* ============================================================================ */

/******************************************************************************/
/* Legacy Header File                                                         */
/* Not recommended for use in new projects.                                   */
/* Please use the msp430.h file or the device specific header file            */
/******************************************************************************/

/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430x415 and MSP430x417 devices.
*
* Texas Instruments, Version 1.4
*
* Rev. 1.0, -
* Rev. 1.1, Removed unused def of TASSEL2
* Rev. 1.2, Added VLD bits in SVS module
* Rev. 1.3, Removed definitions for BTRESET
* Rev. 1.4, added definitions for Interrupt Vectors xxIV
*
********************************************************************/

#ifndef __msp430x41x
#define __msp430x41x

#define __MSP430_HEADER_VERSION__ 1064

#define __MSP430_TI_HEADERS__

#ifdef __cplusplus
extern "C" {
#endif

#include <iomacros.h>

/************************************************************
* STANDARD BITS
************************************************************/

#define BIT0                (0x0001)
#define BIT1                (0x0002)
#define BIT2                (0x0004)
#define BIT3                (0x0008)
#define BIT4                (0x0010)
#define BIT5                (0x0020)
#define BIT6                (0x0040)
#define BIT7                (0x0080)
#define BIT8                (0x0100)
#define BIT9                (0x0200)
#define BITA                (0x0400)
#define BITB                (0x0800)
#define BITC                (0x1000)
#define BITD                (0x2000)
#define BITE                (0x4000)
#define BITF                (0x8000)

/************************************************************
* STATUS REGISTER BITS
************************************************************/

#define C                   (0x0001)
#define Z                   (0x0002)
#define N                   (0x0004)
#define V                   (0x0100)
#define GIE                 (0x0008)
#define CPUOFF              (0x0010)
#define OSCOFF              (0x0020)
#define SCG0                (0x0040)
#define SCG1                (0x0080)

/* Low Power Modes coded with Bits 4-7 in SR */

#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0                (CPUOFF)
#define LPM1                (SCG0+CPUOFF)
#define LPM2                (SCG1+CPUOFF)
#define LPM3                (SCG1+SCG0+CPUOFF)
#define LPM4                (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */

#else /* Begin #defines for C */
#define LPM0_bits           (CPUOFF)
#define LPM1_bits           (SCG0+CPUOFF)
#define LPM2_bits           (SCG1+CPUOFF)
#define LPM3_bits           (SCG1+SCG0+CPUOFF)
#define LPM4_bits           (SCG1+SCG0+OSCOFF+CPUOFF)

#include "in430.h"

#define LPM0      _BIS_SR(LPM0_bits)     /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1      _BIS_SR(LPM1_bits)     /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2      _BIS_SR(LPM2_bits)     /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3      _BIS_SR(LPM3_bits)     /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4      _BIS_SR(LPM4_bits)     /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */

/************************************************************
* PERIPHERAL FILE MAP
************************************************************/

/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/

#define IE1_                  0x0000    /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define WDTIE               (0x01)
#define OFIE                (0x02)
#define NMIIE               (0x10)
#define ACCVIE              (0x20)

#define IFG1_                 0x0002    /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define WDTIFG              (0x01)
#define OFIFG               (0x02)
#define NMIIFG              (0x10)

#define IE2_                  0x0001    /* Interrupt Enable 2 */
sfrb(IE2, IE2_);
#define BTIE                (0x80)

#define IFG2_                 0x0003    /* Interrupt Flag 2 */
sfrb(IFG2, IFG2_);
#define BTIFG               (0x80)

/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__            /* Definition to show that Module is available */

#define WDTCTL_               0x0120    /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0              (0x0001)
#define WDTIS1              (0x0002)
#define WDTSSEL             (0x0004)
#define WDTCNTCL            (0x0008)
#define WDTTMSEL            (0x0010)
#define WDTNMI              (0x0020)
#define WDTNMIES            (0x0040)
#define WDTHOLD             (0x0080)

#define WDTPW               (0x5A00)

/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32         (WDTPW+WDTTMSEL+WDTCNTCL)                         /* 32ms interval (default) */
#define WDT_MDLY_8          (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0)                  /* 8ms     " */
#define WDT_MDLY_0_5        (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1)                  /* 0.5ms   " */
#define WDT_MDLY_0_064      (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0)           /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000       (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL)                 /* 1000ms  " */
#define WDT_ADLY_250        (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0)          /* 250ms   " */
#define WDT_ADLY_16         (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1)          /* 16ms    " */
#define WDT_ADLY_1_9        (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0)   /* 1.9ms   " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32         (WDTPW+WDTCNTCL)                                  /* 32ms interval (default) */
#define WDT_MRST_8          (WDTPW+WDTCNTCL+WDTIS0)                           /* 8ms     " */
#define WDT_MRST_0_5        (WDTPW+WDTCNTCL+WDTIS1)                           /* 0.5ms   " */
#define WDT_MRST_0_064      (WDTPW+WDTCNTCL+WDTIS1+WDTIS0)                    /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000       (WDTPW+WDTCNTCL+WDTSSEL)                          /* 1000ms  " */
#define WDT_ARST_250        (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0)                   /* 250ms   " */
#define WDT_ARST_16         (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1)                   /* 16ms    " */
#define WDT_ARST_1_9        (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0)            /* 1.9ms   " */

/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE               0x01 */
/* #define WDTIFG              0x01 */

/************************************************************
* DIGITAL I/O Port1/2
************************************************************/
#define __MSP430_HAS_PORT1__          /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2__          /* Definition to show that Module is available */

#define P1IN_                 0x0020    /* Port 1 Input */
const_sfrb(P1IN, P1IN_);
#define P1OUT_                0x0021    /* Port 1 Output */
sfrb(P1OUT, P1OUT_);
#define P1DIR_                0x0022    /* Port 1 Direction */
sfrb(P1DIR, P1DIR_);
#define P1IFG_                0x0023    /* Port 1 Interrupt Flag */
sfrb(P1IFG, P1IFG_);
#define P1IES_                0x0024    /* Port 1 Interrupt Edge Select */
sfrb(P1IES, P1IES_);
#define P1IE_                 0x0025    /* Port 1 Interrupt Enable */
sfrb(P1IE, P1IE_);
#define P1SEL_                0x0026    /* Port 1 Selection */
sfrb(P1SEL, P1SEL_);

#define P2IN_                 0x0028    /* Port 2 Input */
const_sfrb(P2IN, P2IN_);
#define P2OUT_                0x0029    /* Port 2 Output */
sfrb(P2OUT, P2OUT_);
#define P2DIR_                0x002A    /* Port 2 Direction */
sfrb(P2DIR, P2DIR_);
#define P2IFG_                0x002B    /* Port 2 Interrupt Flag */
sfrb(P2IFG, P2IFG_);
#define P2IES_                0x002C    /* Port 2 Interrupt Edge Select */
sfrb(P2IES, P2IES_);
#define P2IE_                 0x002D    /* Port 2 Interrupt Enable */
sfrb(P2IE, P2IE_);
#define P2SEL_                0x002E    /* Port 2 Selection */
sfrb(P2SEL, P2SEL_);

/************************************************************
* DIGITAL I/O Port3/4
************************************************************/
#define __MSP430_HAS_PORT3__          /* Definition to show that Module is available */
#define __MSP430_HAS_PORT4__          /* Definition to show that Module is available */

#define P3IN_                 0x0018    /* Port 3 Input */
const_sfrb(P3IN, P3IN_);
#define P3OUT_                0x0019    /* Port 3 Output */
sfrb(P3OUT, P3OUT_);
#define P3DIR_                0x001A    /* Port 3 Direction */
sfrb(P3DIR, P3DIR_);
#define P3SEL_                0x001B    /* Port 3 Selection */
sfrb(P3SEL, P3SEL_);

#define P4IN_                 0x001C    /* Port 4 Input */
const_sfrb(P4IN, P4IN_);
#define P4OUT_                0x001D    /* Port 4 Output */
sfrb(P4OUT, P4OUT_);
#define P4DIR_                0x001E    /* Port 4 Direction */
sfrb(P4DIR, P4DIR_);
#define P4SEL_                0x001F    /* Port 4 Selection */
sfrb(P4SEL, P4SEL_);

/************************************************************
* DIGITAL I/O Port5/6
************************************************************/
#define __MSP430_HAS_PORT5__          /* Definition to show that Module is available */
#define __MSP430_HAS_PORT6__          /* Definition to show that Module is available */

#define P5IN_                 0x0030    /* Port 5 Input */
const_sfrb(P5IN, P5IN_);
#define P5OUT_                0x0031    /* Port 5 Output */
sfrb(P5OUT, P5OUT_);
#define P5DIR_                0x0032    /* Port 5 Direction */
sfrb(P5DIR, P5DIR_);
#define P5SEL_                0x0033    /* Port 5 Selection */
sfrb(P5SEL, P5SEL_);

#define P6IN_                 0x0034    /* Port 6 Input */
const_sfrb(P6IN, P6IN_);
#define P6OUT_                0x0035    /* Port 6 Output */
sfrb(P6OUT, P6OUT_);
#define P6DIR_                0x0036    /* Port 6 Direction */
sfrb(P6DIR, P6DIR_);
#define P6SEL_                0x0037    /* Port 6 Selection */
sfrb(P6SEL, P6SEL_);

/************************************************************
* BASIC TIMER
************************************************************/
#define __MSP430_HAS_BT__             /* Definition to show that Module is available */

#define BTCTL_                0x0040    /* Basic Timer Control */
sfrb(BTCTL, BTCTL_);
/* The bit names have been prefixed with "BT" */
#define BTIP0               (0x01)
#define BTIP1               (0x02)
#define BTIP2               (0x04)
#define BTFRFQ0             (0x08)
#define BTFRFQ1             (0x10)
#define BTDIV               (0x20)                     /* fCLK2 = ACLK:256 */
#define BTHOLD              (0x40)                     /* BT1 is held if this bit is set */
#define BTSSEL              (0x80)                     /* fBT = fMCLK (main clock) */

#define BTCNT1_               0x0046    /* Basic Timer Count 1 */
sfrb(BTCNT1, BTCNT1_);
#define BTCNT2_               0x0047    /* Basic Timer Count 2 */
sfrb(BTCNT2, BTCNT2_);

/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
#define BT_fCLK2_ACLK               (0x00)
#define BT_fCLK2_ACLK_DIV256        (BTDIV)
#define BT_fCLK2_MCLK               (BTSSEL)

/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
#define BT_fCLK2_DIV2       (0x00)                    /* fINT = fCLK2:2 (default) */
#define BT_fCLK2_DIV4       (BTIP0)                   /* fINT = fCLK2:4 */
#define BT_fCLK2_DIV8       (BTIP1)                   /* fINT = fCLK2:8 */
#define BT_fCLK2_DIV16      (BTIP1+BTIP0)             /* fINT = fCLK2:16 */
#define BT_fCLK2_DIV32      (BTIP2)                   /* fINT = fCLK2:32 */
#define BT_fCLK2_DIV64      (BTIP2+BTIP0)             /* fINT = fCLK2:64 */
#define BT_fCLK2_DIV128     (BTIP2+BTIP1)             /* fINT = fCLK2:128 */
#define BT_fCLK2_DIV256     (BTIP2+BTIP1+BTIP0)       /* fINT = fCLK2:256 */
/* Frequency of LCD coded with Bits 3-4 */
#define BT_fLCD_DIV32       (0x00)                    /* fLCD = fACLK:32 (default) */
#define BT_fLCD_DIV64       (BTFRFQ0)                 /* fLCD = fACLK:64 */
#define BT_fLCD_DIV128      (BTFRFQ1)                 /* fLCD = fACLK:128 */
#define BT_fLCD_DIV256      (BTFRFQ1+BTFRFQ0)         /* fLCD = fACLK:256 */
/* LCD frequency values with fBT=fACLK */
#define BT_fLCD_1K          (0x00)                    /* fACLK:32 (default) */
#define BT_fLCD_512         (BTFRFQ0)                 /* fACLK:64 */
#define BT_fLCD_256         (BTFRFQ1)                 /* fACLK:128 */
#define BT_fLCD_128         (BTFRFQ1+BTFRFQ0)         /* fACLK:256 */
/* LCD frequency values with fBT=fMCLK */
#define BT_fLCD_31K         (BTSSEL)                  /* fMCLK:32 */
#define BT_fLCD_15_5K       (BTSSEL+BTFRFQ0)          /* fMCLK:64 */
#define BT_fLCD_7_8K        (BTSSEL+BTFRFQ1+BTFRFQ0)  /* fMCLK:256 */
/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
/* fBT=fACLK is thought for longer interval times */
#define BT_ADLY_0_064       (0x00)                    /* 0.064ms interval (default) */
#define BT_ADLY_0_125       (BTIP0)                   /* 0.125ms    " */
#define BT_ADLY_0_25        (BTIP1)                   /* 0.25ms     " */
#define BT_ADLY_0_5         (BTIP1+BTIP0)             /* 0.5ms      " */
#define BT_ADLY_1           (BTIP2)                   /* 1ms        " */
#define BT_ADLY_2           (BTIP2+BTIP0)             /* 2ms        " */
#define BT_ADLY_4           (BTIP2+BTIP1)             /* 4ms        " */
#define BT_ADLY_8           (BTIP2+BTIP1+BTIP0)       /* 8ms        " */
#define BT_ADLY_16          (BTDIV)                   /* 16ms       " */
#define BT_ADLY_32          (BTDIV+BTIP0)             /* 32ms       " */
#define BT_ADLY_64          (BTDIV+BTIP1)             /* 64ms       " */
#define BT_ADLY_125         (BTDIV+BTIP1+BTIP0)       /* 125ms      " */
#define BT_ADLY_250         (BTDIV+BTIP2)             /* 250ms      " */
#define BT_ADLY_500         (BTDIV+BTIP2+BTIP0)       /* 500ms      " */
#define BT_ADLY_1000        (BTDIV+BTIP2+BTIP1)       /* 1000ms     " */
#define BT_ADLY_2000        (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms     " */
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
/* the timing for short intervals is more precise than ACLK */
/* NOTE */
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
/* Too low interval time results in interrupts too frequent for the processor to handle! */
#define BT_MDLY_0_002       (BTSSEL)                  /* 0.002ms interval       *** interval times */
#define BT_MDLY_0_004       (BTSSEL+BTIP0)            /* 0.004ms    "           *** too short for */
#define BT_MDLY_0_008       (BTSSEL+BTIP1)            /* 0.008ms    "           *** interrupt */
#define BT_MDLY_0_016       (BTSSEL+BTIP1+BTIP0)      /* 0.016ms    "           *** handling */
#define BT_MDLY_0_032       (BTSSEL+BTIP2)            /* 0.032ms    " */
#define BT_MDLY_0_064       (BTSSEL+BTIP2+BTIP0)      /* 0.064ms    " */
#define BT_MDLY_0_125       (BTSSEL+BTIP2+BTIP1)      /* 0.125ms    " */
#define BT_MDLY_0_25        (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms     " */

/* Reset/Hold coded with Bits 6-7 in BT(1)CTL */
/* this is for BT */
//#define BTRESET_CNT1        (BTRESET)           /* BTCNT1 is reset while BTRESET is set */
//#define BTRESET_CNT1_2      (BTRESET+BTDIV)     /* BTCNT1 .AND. BTCNT2 are reset while ~ is set */
/* this is for BT1 */
#define BTHOLD_CNT1         (BTHOLD)            /* BTCNT1 is held while BTHOLD is set */
#define BTHOLD_CNT1_2       (BTHOLD+BTDIV)      /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */

/* INTERRUPT CONTROL BITS */
/* #define BTIE                0x80 */
/* #define BTIFG               0x80 */

/************************************************************
* SYSTEM CLOCK, FLL+ (x41x)
************************************************************/
#define __MSP430_HAS_FLLPLUS_SMALL__  /* Definition to show that Module is available */

#define SCFI0_                0x0050    /* System Clock Frequency Integrator 0 */
sfrb(SCFI0, SCFI0_);
#define FN_2                (0x04)    /* fDCOCLK =   1.4-12MHz*/
#define FN_3                (0x08)    /* fDCOCLK =   2.2-17Mhz*/
#define FN_4                (0x10)    /* fDCOCLK =   3.2-25Mhz*/
#define FN_8                (0x20)    /* fDCOCLK =     5-40Mhz*/
#define FLLD0               (0x40)    /* Loop Divider Bit : 0 */
#define FLLD1               (0x80)    /* Loop Divider Bit : 1 */

#define FLLD_1              (0x00)    /* Multiply Selected Loop Freq. By 1 */
#define FLLD_2              (0x40)    /* Multiply Selected Loop Freq. By 2 */
#define FLLD_4              (0x80)    /* Multiply Selected Loop Freq. By 4 */
#define FLLD_8              (0xC0)    /* Multiply Selected Loop Freq. By 8 */

#define SCFI1_                0x0051    /* System Clock Frequency Integrator 1 */
sfrb(SCFI1, SCFI1_);
#define SCFQCTL_              0x0052    /* System Clock Frequency Control */
sfrb(SCFQCTL, SCFQCTL_);
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
/* #define SCFQ_32K            0x00                        fMCLK=1*fACLK       only a range from */
#define SCFQ_64K            (0x01)                     /* fMCLK=2*fACLK          1+1 to 127+1 is possible */
#define SCFQ_128K           (0x03)                     /* fMCLK=4*fACLK */
#define SCFQ_256K           (0x07)                     /* fMCLK=8*fACLK */
#define SCFQ_512K           (0x0F)                     /* fMCLK=16*fACLK */
#define SCFQ_1M             (0x1F)                     /* fMCLK=32*fACLK */
#define SCFQ_2M             (0x3F)                     /* fMCLK=64*fACLK */
#define SCFQ_4M             (0x7F)                     /* fMCLK=128*fACLK */
#define SCFQ_M              (0x80)                     /* Modulation Disable */

#define FLL_CTL0_             0x0053    /* FLL+ Control 0 */
sfrb(FLL_CTL0, FLL_CTL0_);
#define DCOF                (0x01)                     /* DCO Fault Flag */
#define LFOF                (0x02)                     /* Low Frequency Oscillator Fault Flag */
#define XT1OF               (0x04)                     /* High Frequency Oscillator Fault Flag */
#define OSCCAP0             (0x10)                     /* XIN/XOUT Cap 0 */
#define OSCCAP1             (0x20)                     /* XIN/XOUT Cap 1 */
#define XTS_FLL             (0x40)                     /* 1: Selects high-freq. oscillator */
#define DCOPLUS             (0x80)                     /* DCO+ Enable */

#define XCAP0PF             (0x00)                     /* XIN Cap = XOUT Cap = 0pf */
#define XCAP10PF            (0x10)                     /* XIN Cap = XOUT Cap = 10pf */
#define XCAP14PF            (0x20)                     /* XIN Cap = XOUT Cap = 14pf */
#define XCAP18PF            (0x30)                     /* XIN Cap = XOUT Cap = 18pf */
#define OSCCAP_0            (0x00)                     /* XIN Cap = XOUT Cap = 0pf */
#define OSCCAP_1            (0x10)                     /* XIN Cap = XOUT Cap = 10pf */
#define OSCCAP_2            (0x20)                     /* XIN Cap = XOUT Cap = 14pf */
#define OSCCAP_3            (0x30)                     /* XIN Cap = XOUT Cap = 18pf */

#define FLL_CTL1_             0x0054    /* FLL+ Control 1 */
sfrb(FLL_CTL1, FLL_CTL1_);
#define FLL_DIV0            (0x01)                     /* FLL+ Divide Px.x/ACLK 0 */
#define FLL_DIV1            (0x02)                     /* FLL+ Divide Px.x/ACLK 1 */

#define FLL_DIV_1           (0x00)                     /* FLL+ Divide Px.x/ACLK By 1 */
#define FLL_DIV_2           (0x01)                     /* FLL+ Divide Px.x/ACLK By 2 */
#define FLL_DIV_4           (0x02)                     /* FLL+ Divide Px.x/ACLK By 4 */
#define FLL_DIV_8           (0x03)                     /* FLL+ Divide Px.x/ACLK By 8 */

/* INTERRUPT CONTROL BITS */
/* These two bits are defined in the Special Function Registers */
/* #define OFIFG               0x02 */
/* #define OFIE                0x02 */

/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
#define __MSP430_HAS_SVS__            /* Definition to show that Module is available */

#define SVSCTL_               0x0056    /* SVS Control */
sfrb(SVSCTL, SVSCTL_);
#define SVSFG               (0x01)    /* SVS Flag */
#define SVSOP               (0x02)    /* SVS output (read only) */
#define SVSON               (0x04)    /* Switches the SVS on/off */
#define PORON               (0x08)    /* Enable POR Generation if Low Voltage */
#define VLD0                (0x10)
#define VLD1                (0x20)
#define VLD2                (0x40)
#define VLD3                (0x80)

#define VLDON               (0x10)
#define VLDOFF              (0x00)
#define VLD_1_8V            (0x10)

/************************************************************
* LCD
************************************************************/
#define __MSP430_HAS_LCD4__           /* Definition to show that Module is available */

#define LCDCTL_               0x0090    /* LCD Control */
sfrb(LCDCTL, LCDCTL_);
/* the names of the mode bits are different from the spec */
#define LCDON               (0x01)
//#define LCDLOWR             (0x02)
#define LCDSON              (0x04)
#define LCDMX0              (0x08)
#define LCDMX1              (0x10)
#define LCDP0               (0x20)
#define LCDP1               (0x40)
#define LCDP2               (0x80)
/* Display modes coded with Bits 2-4 */
#define LCDSTATIC           (LCDSON)
#define LCD2MUX             (LCDMX0+LCDSON)
#define LCD3MUX             (LCDMX1+LCDSON)
#define LCD4MUX             (LCDMX1+LCDMX0+LCDSON)
/* Group select code with Bits 5-7                     Seg.lines   Dig.output */
#define LCDSG0              (0x00)                    /* ---------   Port Only (default) */
#define LCDSG0_1            (LCDP0)                   /* S0  - S15   see Datasheet */
#define LCDSG0_2            (LCDP1)                   /* S0  - S19   see Datasheet */
#define LCDSG0_3            (LCDP1+LCDP0)             /* S0  - S23   see Datasheet */
#define LCDSG0_4            (LCDP2)                   /* S0  - S27   see Datasheet */
#define LCDSG0_5            (LCDP2+LCDP0)             /* S0  - S31   see Datasheet */
#define LCDSG0_6            (LCDP2+LCDP1)             /* S0  - S35   see Datasheet */
#define LCDSG0_7            (LCDP2+LCDP1+LCDP0)       /* S0  - S39   see Datasheet */
/* NOTE: YOU CAN ONLY USE THE 'S' OR 'G' DECLARATIONS FOR A COMMAND */
/* MOV  #LCDSG0_3+LCDOG2_7,&LCDCTL ACTUALY MEANS MOV  #LCDP1,&LCDCTL! */
#define LCDOG1_7            (0x00)                    /* ---------   Port Only (default) */
#define LCDOG2_7            (LCDP0)                   /* S0  - S15   see Datasheet */
#define LCDOG3_7            (LCDP1)                   /* S0  - S19   see Datasheet */
#define LCDOG4_7            (LCDP1+LCDP0)             /* S0  - S23   see Datasheet */
#define LCDOG5_7            (LCDP2)                   /* S0  - S27   see Datasheet */
#define LCDOG6_7            (LCDP2+LCDP0)             /* S0  - S31   see Datasheet */
#define LCDOG7              (LCDP2+LCDP1)             /* S0  - S35   see Datasheet */
#define LCDOGOFF            (LCDP2+LCDP1+LCDP0)       /* S0  - S39   see Datasheet */

#define LCDMEM_             (0x0091)  /* LCD Memory */
#ifndef __STDC__
#define LCDMEM              (LCDMEM_) /* LCD Memory (for assembler) */
#else
#define LCDMEM              ((volatile char*) LCDMEM_) /* LCD Memory (for C) */
#endif
#define LCDM1_                0x0091    /* LCD Memory 1 */
sfrb(LCDM1, LCDM1_);
#define LCDM2_                0x0092    /* LCD Memory 2 */
sfrb(LCDM2, LCDM2_);
#define LCDM3_                0x0093    /* LCD Memory 3 */
sfrb(LCDM3, LCDM3_);
#define LCDM4_                0x0094    /* LCD Memory 4 */
sfrb(LCDM4, LCDM4_);
#define LCDM5_                0x0095    /* LCD Memory 5 */
sfrb(LCDM5, LCDM5_);
#define LCDM6_                0x0096    /* LCD Memory 6 */
sfrb(LCDM6, LCDM6_);
#define LCDM7_                0x0097    /* LCD Memory 7 */
sfrb(LCDM7, LCDM7_);
#define LCDM8_                0x0098    /* LCD Memory 8 */
sfrb(LCDM8, LCDM8_);
#define LCDM9_                0x0099    /* LCD Memory 9 */
sfrb(LCDM9, LCDM9_);
#define LCDM10_               0x009A    /* LCD Memory 10 */
sfrb(LCDM10, LCDM10_);
#define LCDM11_               0x009B    /* LCD Memory 11 */
sfrb(LCDM11, LCDM11_);
#define LCDM12_               0x009C    /* LCD Memory 12 */
sfrb(LCDM12, LCDM12_);
#define LCDM13_               0x009D    /* LCD Memory 13 */
sfrb(LCDM13, LCDM13_);
#define LCDM14_               0x009E    /* LCD Memory 14 */
sfrb(LCDM14, LCDM14_);
#define LCDM15_               0x009F    /* LCD Memory 15 */
sfrb(LCDM15, LCDM15_);
#define LCDM16_               0x00A0    /* LCD Memory 16 */
sfrb(LCDM16, LCDM16_);
#define LCDM17_               0x00A1    /* LCD Memory 17 */
sfrb(LCDM17, LCDM17_);
#define LCDM18_               0x00A2    /* LCD Memory 18 */
sfrb(LCDM18, LCDM18_);
#define LCDM19_               0x00A3    /* LCD Memory 19 */
sfrb(LCDM19, LCDM19_);
#define LCDM20_               0x00A4    /* LCD Memory 20 */
sfrb(LCDM20, LCDM20_);

#define LCDMA               (LCDM10)  /* LCD Memory A */
#define LCDMB               (LCDM11)  /* LCD Memory B */
#define LCDMC               (LCDM12)  /* LCD Memory C */
#define LCDMD               (LCDM13)  /* LCD Memory D */
#define LCDME               (LCDM14)  /* LCD Memory E */
#define LCDMF               (LCDM15)  /* LCD Memory F */

/************************************************************
* Timer0_A3
************************************************************/
#define __MSP430_HAS_TA3__            /* Definition to show that Module is available */

#define TA0IV_                0x012E    /* Timer0_A3 Interrupt Vector Word */
const_sfrw(TA0IV, TA0IV_);
#define TA0CTL_               0x0160    /* Timer0_A3 Control */
sfrw(TA0CTL, TA0CTL_);
#define TA0CCTL0_             0x0162    /* Timer0_A3 Capture/Compare Control 0 */
sfrw(TA0CCTL0, TA0CCTL0_);
#define TA0CCTL1_             0x0164    /* Timer0_A3 Capture/Compare Control 1 */
sfrw(TA0CCTL1, TA0CCTL1_);
#define TA0CCTL2_             0x0166    /* Timer0_A3 Capture/Compare Control 2 */
sfrw(TA0CCTL2, TA0CCTL2_);
#define TA0R_                 0x0170    /* Timer0_A3 */
sfrw(TA0R, TA0R_);
#define TA0CCR0_              0x0172    /* Timer0_A3 Capture/Compare 0 */
sfrw(TA0CCR0, TA0CCR0_);
#define TA0CCR1_              0x0174    /* Timer0_A3 Capture/Compare 1 */
sfrw(TA0CCR1, TA0CCR1_);
#define TA0CCR2_              0x0176    /* Timer0_A3 Capture/Compare 2 */
sfrw(TA0CCR2, TA0CCR2_);

/* Alternate register names */
#define TAIV                TA0IV     /* Timer A Interrupt Vector Word */
#define TACTL               TA0CTL    /* Timer A Control */
#define TACCTL0             TA0CCTL0  /* Timer A Capture/Compare Control 0 */
#define TACCTL1             TA0CCTL1  /* Timer A Capture/Compare Control 1 */
#define TACCTL2             TA0CCTL2  /* Timer A Capture/Compare Control 2 */
#define TAR                 TA0R      /* Timer A */
#define TACCR0              TA0CCR0   /* Timer A Capture/Compare 0 */
#define TACCR1              TA0CCR1   /* Timer A Capture/Compare 1 */
#define TACCR2              TA0CCR2   /* Timer A Capture/Compare 2 */
#define TAIV_               TA0IV_    /* Timer A Interrupt Vector Word */
#define TACTL_              TA0CTL_   /* Timer A Control */
#define TACCTL0_            TA0CCTL0_ /* Timer A Capture/Compare Control 0 */
#define TACCTL1_            TA0CCTL1_ /* Timer A Capture/Compare Control 1 */
#define TACCTL2_            TA0CCTL2_ /* Timer A Capture/Compare Control 2 */
#define TAR_                TA0R_     /* Timer A */
#define TACCR0_             TA0CCR0_  /* Timer A Capture/Compare 0 */
#define TACCR1_             TA0CCR1_  /* Timer A Capture/Compare 1 */
#define TACCR2_             TA0CCR2_  /* Timer A Capture/Compare 2 */

/* Alternate register names 2 */
#define CCTL0               TACCTL0   /* Timer A Capture/Compare Control 0 */
#define CCTL1               TACCTL1   /* Timer A Capture/Compare Control 1 */
#define CCTL2               TACCTL2   /* Timer A Capture/Compare Control 2 */
#define CCR0                TACCR0    /* Timer A Capture/Compare 0 */
#define CCR1                TACCR1    /* Timer A Capture/Compare 1 */
#define CCR2                TACCR2    /* Timer A Capture/Compare 2 */
#define CCTL0_              TACCTL0_  /* Timer A Capture/Compare Control 0 */
#define CCTL1_              TACCTL1_  /* Timer A Capture/Compare Control 1 */
#define CCTL2_              TACCTL2_  /* Timer A Capture/Compare Control 2 */
#define CCR0_               TACCR0_   /* Timer A Capture/Compare 0 */
#define CCR1_               TACCR1_   /* Timer A Capture/Compare 1 */
#define CCR2_               TACCR2_   /* Timer A Capture/Compare 2 */

#define TASSEL1             (0x0200)  /* Timer A clock source select 1 */
#define TASSEL0             (0x0100)  /* Timer A clock source select 0 */
#define ID1                 (0x0080)  /* Timer A clock input divider 1 */
#define ID0                 (0x0040)  /* Timer A clock input divider 0 */
#define MC1                 (0x0020)  /* Timer A mode control 1 */
#define MC0                 (0x0010)  /* Timer A mode control 0 */
#define TACLR               (0x0004)  /* Timer A counter clear */
#define TAIE                (0x0002)  /* Timer A counter interrupt enable */
#define TAIFG               (0x0001)  /* Timer A counter interrupt flag */

#define MC_0                (0x0000)  /* Timer A mode control: 0 - Stop */
#define MC_1                (0x0010)  /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2                (0x0020)  /* Timer A mode control: 2 - Continous up */
#define MC_3                (0x0030)  /* Timer A mode control: 3 - Up/Down */
#define ID_0                (0x0000)  /* Timer A input divider: 0 - /1 */
#define ID_1                (0x0040)  /* Timer A input divider: 1 - /2 */
#define ID_2                (0x0080)  /* Timer A input divider: 2 - /4 */
#define ID_3                (0x00C0)  /* Timer A input divider: 3 - /8 */
#define TASSEL_0            (0x0000) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1            (0x0100) /* Timer A clock source select: 1 - ACLK  */
#define TASSEL_2            (0x0200) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3            (0x0300) /* Timer A clock source select: 3 - INCLK */

#define CM1                 (0x8000)  /* Capture mode 1 */
#define CM0                 (0x4000)  /* Capture mode 0 */
#define CCIS1               (0x2000)  /* Capture input select 1 */
#define CCIS0               (0x1000)  /* Capture input select 0 */
#define SCS                 (0x0800)  /* Capture sychronize */
#define SCCI                (0x0400)  /* Latched capture signal (read) */
#define CAP                 (0x0100)  /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2             (0x0080)  /* Output mode 2 */
#define OUTMOD1             (0x0040)  /* Output mode 1 */
#define OUTMOD0             (0x0020)  /* Output mode 0 */
#define CCIE                (0x0010)  /* Capture/compare interrupt enable */
#define CCI                 (0x0008)  /* Capture input signal (read) */
#define OUT                 (0x0004)  /* PWM Output signal if output mode 0 */
#define COV                 (0x0002)  /* Capture/compare overflow flag */
#define CCIFG               (0x0001)  /* Capture/compare interrupt flag */

#define OUTMOD_0            (0x0000)  /* PWM output mode: 0 - output only */
#define OUTMOD_1            (0x0020)  /* PWM output mode: 1 - set */
#define OUTMOD_2            (0x0040)  /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3            (0x0060)  /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4            (0x0080)  /* PWM output mode: 4 - toggle */
#define OUTMOD_5            (0x00A0)  /* PWM output mode: 5 - Reset */
#define OUTMOD_6            (0x00C0)  /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7            (0x00E0)  /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0              (0x0000) /* Capture input select: 0 - CCIxA */
#define CCIS_1              (0x1000) /* Capture input select: 1 - CCIxB */
#define CCIS_2              (0x2000) /* Capture input select: 2 - GND */
#define CCIS_3              (0x3000) /* Capture input select: 3 - Vcc */
#define CM_0                (0x0000) /* Capture mode: 0 - disabled */
#define CM_1                (0x4000) /* Capture mode: 1 - pos. edge */
#define CM_2                (0x8000) /* Capture mode: 1 - neg. edge */
#define CM_3                (0xC000) /* Capture mode: 1 - both edges */

/* T0_A3IV Definitions */
#define TA0IV_NONE          (0x0000)    /* No Interrupt pending */
#define TA0IV_TACCR1        (0x0002)    /* TA0CCR1_CCIFG */
#define TA0IV_TACCR2        (0x0004)    /* TA0CCR2_CCIFG */
#define TA0IV_6             (0x0006)    /* Reserved */
#define TA0IV_8             (0x0008)    /* Reserved */
#define TA0IV_TAIFG         (0x000A)    /* TA0IFG */

/************************************************************
* Timer1_A5
************************************************************/
#define __MSP430_HAS_T1A5__           /* Definition to show that Module is available */

#define TA1IV_                0x011E    /* Timer1_A5 Interrupt Vector Word */
const_sfrw(TA1IV, TA1IV_);
#define TA1CTL_               0x0180    /* Timer1_A5 Control */
sfrw(TA1CTL, TA1CTL_);
#define TA1CCTL0_             0x0182    /* Timer1_A5 Capture/Compare Control 0 */
sfrw(TA1CCTL0, TA1CCTL0_);
#define TA1CCTL1_             0x0184    /* Timer1_A5 Capture/Compare Control 1 */
sfrw(TA1CCTL1, TA1CCTL1_);
#define TA1CCTL2_             0x0186    /* Timer1_A5 Capture/Compare Control 2 */
sfrw(TA1CCTL2, TA1CCTL2_);
#define TA1CCTL3_             0x0188    /* Timer1_A5 Capture/Compare Control 3 */
sfrw(TA1CCTL3, TA1CCTL3_);
#define TA1CCTL4_             0x018A    /* Timer1_A5 Capture/Compare Control 4 */
sfrw(TA1CCTL4, TA1CCTL4_);
#define TA1R_                 0x0190    /* Timer1_A5 */
sfrw(TA1R, TA1R_);
#define TA1CCR0_              0x0192    /* Timer1_A5 Capture/Compare 0 */
sfrw(TA1CCR0, TA1CCR0_);
#define TA1CCR1_              0x0194    /* Timer1_A5 Capture/Compare 1 */
sfrw(TA1CCR1, TA1CCR1_);
#define TA1CCR2_              0x0196    /* Timer1_A5 Capture/Compare 2 */
sfrw(TA1CCR2, TA1CCR2_);
#define TA1CCR3_              0x0198    /* Timer1_A5 Capture/Compare 3 */
sfrw(TA1CCR3, TA1CCR3_);
#define TA1CCR4_              0x019A    /* Timer1_A5 Capture/Compare 4 */
sfrw(TA1CCR4, TA1CCR4_);

/* Bits are already defined within the Timer0_Ax */

/* T1_A5IV Definitions */
#define TA1IV_NONE          (0x0000)    /* No Interrupt pending */
#define TA1IV_TACCR1        (0x0002)    /* TA1CCR1_CCIFG */
#define TA1IV_TACCR2        (0x0004)    /* TA1CCR2_CCIFG */
#define TA1IV_TACCR3        (0x0006)    /* TA1CCR3_CCIFG */
#define TA1IV_TACCR4        (0x0008)    /* TA1CCR4_CCIFG */
#define TA1IV_TAIFG         (0x000A)    /* TA1IFG */

/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH__          /* Definition to show that Module is available */

#define FCTL1_                0x0128    /* FLASH Control 1 */
sfrw(FCTL1, FCTL1_);
#define FCTL2_                0x012A    /* FLASH Control 2 */
sfrw(FCTL2, FCTL2_);
#define FCTL3_                0x012C    /* FLASH Control 3 */
sfrw(FCTL3, FCTL3_);

#define FRKEY               (0x9600)  /* Flash key returned by read */
#define FWKEY               (0xA500)  /* Flash key for write */
#define FXKEY               (0x3300)  /* for use with XOR instruction */

#define ERASE               (0x0002)  /* Enable bit for Flash segment erase */
#define MERAS               (0x0004)  /* Enable bit for Flash mass erase */
#define WRT                 (0x0040)  /* Enable bit for Flash write */
#define BLKWRT              (0x0080)  /* Enable bit for Flash segment write */
#define SEGWRT              (0x0080)  /* old definition */ /* Enable bit for Flash segment write */

#define FN0                 (0x0001)  /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1                 (0x0002)  /*  32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2                 (0x0004)
#endif
#ifndef FN3
#define FN3                 (0x0008)
#endif
#ifndef FN4
#define FN4                 (0x0010)
#endif
#define FN5                 (0x0020)
#define FSSEL0              (0x0040)  /* Flash clock select 0 */        /* to distinguish from USART SSELx */
#define FSSEL1              (0x0080)  /* Flash clock select 1 */

#define FSSEL_0             (0x0000)  /* Flash clock select: 0 - ACLK */
#define FSSEL_1             (0x0040)  /* Flash clock select: 1 - MCLK */
#define FSSEL_2             (0x0080)  /* Flash clock select: 2 - SMCLK */
#define FSSEL_3             (0x00C0)  /* Flash clock select: 3 - SMCLK */

#define BUSY                (0x0001)  /* Flash busy: 1 */
#define KEYV                (0x0002)  /* Flash Key violation flag */
#define ACCVIFG             (0x0004)  /* Flash Access violation flag */
#define WAIT                (0x0008)  /* Wait flag for segment write */
#define LOCK                (0x0010)  /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX                (0x0020)  /* Flash Emergency Exit */

/************************************************************
* Comparator A
************************************************************/
#define __MSP430_HAS_COMPA__          /* Definition to show that Module is available */

#define CACTL1_               0x0059    /* Comparator A Control 1 */
sfrb(CACTL1, CACTL1_);
#define CACTL2_               0x005A    /* Comparator A Control 2 */
sfrb(CACTL2, CACTL2_);
#define CAPD_                 0x005B    /* Comparator A Port Disable */
sfrb(CAPD, CAPD_);

#define CAIFG               (0x01)    /* Comp. A Interrupt Flag */
#define CAIE                (0x02)    /* Comp. A Interrupt Enable */
#define CAIES               (0x04)    /* Comp. A Int. Edge Select: 0:rising / 1:falling */
#define CAON                (0x08)    /* Comp. A enable */
#define CAREF0              (0x10)    /* Comp. A Internal Reference Select 0 */
#define CAREF1              (0x20)    /* Comp. A Internal Reference Select 1 */
#define CARSEL              (0x40)    /* Comp. A Internal Reference Enable */
#define CAEX                (0x80)    /* Comp. A Exchange Inputs */

#define CAREF_0             (0x00)    /* Comp. A Int. Ref. Select 0 : Off */
#define CAREF_1             (0x10)    /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */
#define CAREF_2             (0x20)    /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */
#define CAREF_3             (0x30)    /* Comp. A Int. Ref. Select 3 : Vt*/

#define CAOUT               (0x01)    /* Comp. A Output */
#define CAF                 (0x02)    /* Comp. A Enable Output Filter */
#define P2CA0               (0x04)    /* Comp. A Connect External Signal to CA0 : 1 */
#define P2CA1               (0x08)    /* Comp. A Connect External Signal to CA1 : 1 */
#define CACTL24             (0x10)
#define CACTL25             (0x20)
#define CACTL26             (0x40)
#define CACTL27             (0x80)

#define CAPD0               (0x01)    /* Comp. A Disable Input Buffer of Port Register .0 */
#define CAPD1               (0x02)    /* Comp. A Disable Input Buffer of Port Register .1 */
#define CAPD2               (0x04)    /* Comp. A Disable Input Buffer of Port Register .2 */
#define CAPD3               (0x08)    /* Comp. A Disable Input Buffer of Port Register .3 */
#define CAPD4               (0x10)    /* Comp. A Disable Input Buffer of Port Register .4 */
#define CAPD5               (0x20)    /* Comp. A Disable Input Buffer of Port Register .5 */
#define CAPD6               (0x40)    /* Comp. A Disable Input Buffer of Port Register .6 */
#define CAPD7               (0x80)    /* Comp. A Disable Input Buffer of Port Register .7 */

/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/

#define BASICTIMER_VECTOR   (0x0000)  /* 0xFFE0 Basic Timer */
#define PORT2_VECTOR        (0x0002)  /* 0xFFE2 Port 2 */
#define PORT1_VECTOR        (0x0008)  /* 0xFFE8 Port 1 */
#define TIMER0_A1_VECTOR    (0x000A)  /* 0xFFEA Timer0_A CC1-2, TA0 */
#define TIMER0_A0_VECTOR    (0x000C)  /* 0xFFEC Timer0_A CC0 */
#define WDT_VECTOR          (0x0014) /* 0xFFF4 Watchdog Timer */
#define COMPARATORA_VECTOR  (0x0016) /* 0xFFF6 Comparator A */
#define TIMER1_A1_VECTOR    (0x0018) /* 0xFFF8 Timer1_A CC1-4, TA1 */
#define TIMER1_A0_VECTOR    (0x001A) /* 0xFFFA Timer1_A CC0 */
#define NMI_VECTOR          (0x001C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR        (0x001E) /* 0xFFFE Reset [Highest Priority] */

/* Alternate Names */
#define TIMERA1_VECTOR      TIMER0_A1_VECTOR
#define TIMERA0_VECTOR      TIMER0_A0_VECTOR

/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */

#endif /* #ifndef __msp430x41x */

