


LATEXMK(1L)                                                        LATEXMK(1L)


NAME
       latexmk - generate LaTeX document

SYNOPSIS
       latexmk [options] [file ...]

DESCRIPTION
       Latexmk completely automates the process of compiling a LaTeX document.
       Essentially, it is like a specialized  relative  of  the  general  make
       utility,  but  one  which determines dependencies automatically and has
       some other very useful  features.   In  its  basic  mode  of  operation
       latexmk  is  given  the name of the primary source file for a document,
       and it issues the appropriate sequence of commands to generate a  .dvi,
       .ps, .pdf and/or hardcopy version of the document.

       By  default  latexmk will run the commands necessary to generate a .dvi
       file.

       Latexmk can also be set to run continuously with a suitable  previewer.
       In  that  case  the  LaTeX  program, etc, are rerun whenever one of the
       source files is modified, and the previewer automatically  updates  the
       on-screen view of the compiled document.

       Latexmk  determines  which  are  the  source files by examining the log
       file.  (Optionally, it also examines the list of input and output files
       generated  by  the  -recorder  option  of  modern versions of latex and
       pdflatex.  See the documentation for the -recorder  option  of  latexmk
       below.)   When  latexmk  is  run,  it examines properties of the source
       files, and if any have been changed since the last document generation,
       latexmk  will  run  the various LaTeX processing programs as necessary.
       In particular, it will repeat the run  of  LaTeX  (or  pdflatex)  often
       enough to resolve all cross references; depending on the macro packages
       used.  With some macro packages and document  classes,  four,  or  even
       more,  runs  may be needed. If necessary, latexmk will also run bibtex,
       biber, and/or makeindex.  In addition, latexmk  can  be  configured  to
       generate  other  necessary  files.  For example, from an updated figure
       file it can automatically generate a file in encapsulated postscript or
       another suitable format for reading by LaTeX.

       Latexmk  has  two  different  previewing  options.   In  the simple -pv
       option, a dvi, postscript or pdf previewer is automatically  run  after
       generating  the  dvi,  postscript  or pdf version of the document.  The
       type of file to view is selected according  to  configuration  settings
       and command line options.

       The  second  previewing  option  is the powerful -pvc option (mnemonic:
       "preview continuously").  In this case, latexmk runs continuously, reg-
       ularly  monitoring  all  the  source  files to see if any have changed.
       Every time a change is detected, latexmk runs all the  programs  neces-
       sary to generate a new version of the document.  A good previewer (like
       gv) will then automatically update its display.  Thus the user can sim-
       ply edit a file and, when the changes are written to disk, latexmk com-
       pletely automates the cycle of updating the .dvi (and possibly the  .ps
       and .pdf) file, and refreshing the previewer's display.  It's not quite



                                 30 March 2012                               1





LATEXMK(1L)                                                        LATEXMK(1L)


       WYSIWYG, but usefully close.

       For other previewers, the user may have to manually make the  previewer
       update  its display, which can be (some versions of xdvi and gsview) as
       simple as forcing a redraw of its display.

       Latexmk has the ability to print a banner  in  gray  diagonally  across
       each  page  when  making  the postscript file.  It can also, if needed,
       call an external program to do other postprocessing  on  generated  dvi
       and postscript files.  (See the options -dF and -pF, and the documenta-
       tion for  the  $dvi_filter  and  $ps_filter  configuration  variables.)
       These  capabilities  are leftover from older versions of latexmk.  More
       flexibility can be obtained in  current  versions,  since  the  command
       strings  for  running latex, pdflatex, etc can now be configured to run
       multiple commands.  This also extends the possibility of postprocessing
       generated files to pdf files.  files.

       Latexmk  is highly configurable, both from the command line and in con-
       figuration files, so that it can accommodate a  wide  variety  of  user
       needs  and  system configurations.  Default values are set according to
       the operating system, so latexmk often works without special configura-
       tion  on  MS-Windows,  cygwin,  Linux,  OS-X,  and  other  UNIX systems
       (notably Solaris).

       A very annoying complication handled very reliably by Latexmk, is  that
       LaTeX  is a multiple pass system.  On each run, LaTeX reads in informa-
       tion generated on a previous run, for things like cross referencing and
       indexing.   In  the simplest cases, a second run of LaTeX suffices, and
       often the log file contains a message about the need for another  pass.
       However,  there  is  a  wide variety of add-on macro packages to LaTeX,
       with a variety of behaviors.  The  result  is  to  break  simple-minded
       determinations  of  how many runs are needed and of which programs.  In
       its new version, latexmk has a highly general and efficient solution to
       these issues.  The solution involves retaining between runs information
       on the source files, and a symptom is that latexmk generates  an  extra
       file (with extension .fdb_latexmk, by default) that contains the source
       file information.


LATEXMK OPTIONS AND ARGUMENTS ON COMMAND LINE
       (All options can be introduced by  single  or  double  "-"  characters,
       e.g., "latexmk -help" or "latexmk --help".)

       file   One  or more files can be specified.  If no files are specified,
              latexmk will, by default, run on all files in the current  work-
              ing  directory  with  a  ".tex" extension.  This behavior can be
              changed: see the description concerning the @default_files vari-
              able  in  the section "List of configuration variables usable in
              initialization files".

       If a file is specified without an extension, then the ".tex"  extension
       is automatically added, just as LaTeX does.  Thus, if you specify:

            latexmk foo



                                 30 March 2012                               2





LATEXMK(1L)                                                        LATEXMK(1L)


       then latexmk will operate on the file "foo.tex".


       -auxdir=FOO or -aux-directory=FOO

              Sets  the  directory  for  auxiliary  output files of (pdf)latex
              (.aux, .log etc).  This achieves its effect by  the  -aux-direc-
              tory  option  of (pdf)latex, which currently is only implemented
              on the MiKTeX version of (pdf)latex.

              See  also  the  -outdir/-output-directory   options,   and   the
              $aux_dir,  $out_dir,  and  $search_path_separator  configuration
              variables of latexmk.  In particular, see the  documentation  of
              $out_dir  for  some  complications  on  what directory names are
              suitable.



       -bibtex
              When the source file uses bbl files for bibliography, run bibtex
              or biber as needed to regenerate the bbl files.

              This  property can also be configured by setting the $bibtex_use
              variable to 2 in a configuration file

       -bibtex-
              Never run bibtex or biber.

              A common use for this option is when a document  comes  from  an
              external  source,  complete  with  its bbl file(s), and the user
              does not have the corresponding bib files  available.   In  this
              situation  use  of the -bibtex- option will prevent latexmk from
              trying to run bibtex or biber, which would result in overwriting
              of the bbl files.

       -bibtex-cond
              When  the source file uses bbl file(s) for the bibliography, run
              bibtex or biber as needed to regenerate the bbl files, but  only
              if  the relevant bib file(s) exist.  Thus when the bib files are
              not available, bibtex or biber  is  not  run,  thereby  avoiding
              overwriting of the bbl file(s).  This is the default setting.

              (Note  that  it  is  possible for latexmk to decide that the bib
              file does not exist, even though the bib  file  does  exist  and
              bibtex  or biber finds it.  The problem is that the bib file may
              not be in the current directory but in  some  search  path;  the
              places latexmk and bibtex or biber cause to be searched need not
              be identical.  On modern installations of TeX and  related  pro-
              grams  this  problem  should  not  arise, since latexmk uses the
              kpsewhich program to do the search, and kpsewhich should use the
              same  search  path as bibtex and biber.  If this problem arises,
              use the -bibtex option when invoking latexmk.)





                                 30 March 2012                               3





LATEXMK(1L)                                                        LATEXMK(1L)


       -bm <message>
              A banner message to print diagonally across each page when  con-
              verting  the dvi file to postscript.  The message must be a sin-
              gle argument on the command line so be careful with quoting spa-
              ces and such.

              Note  that  if  the  -bm  option is specified, the -ps option is
              assumed.

       -bi <intensity>
              How dark to print the banner message.  A decimal number  between
              0 and 1.  0 is black and 1 is white.  The default is 0.95, which
              is OK unless your toner cartridge is getting low.

       -bs <scale>
              A decimal number that specifies how  large  the  banner  message
              will  be printed.  Experimentation is necessary to get the right
              scale for your message, as a rule of thumb the scale  should  be
              about  equal  to 1100 divided by the number of characters in the
              message.  The default is 220.0 which is just right for 5 charac-
              ter messages.

       -commands
              List the commands used by latexmk for processing files, and then
              exit.

       -c     Clean up (remove) all regeneratable files generated by latex and
              bibtex or biber except dvi, postscript and pdf.  These files are
              a combination of log files, aux files, latexmk's  database  file
              of  source file information, and those with extensions specified
              in the @generated_exts  configuration  variable.   In  addition,
              files  with  extensions by the $clean_ext configuration variable
              are removed.

              This cleanup is instead of a regular make.  See the  -gg  option
              if you want to do a cleanup then a make.

              If  $bibtex_use  is set to 0 or 1, bbl files are counted as non-
              regeneratable.

              If $cleanup_includes_cusdep_generated is nonzero,  regeneratable
              files  are  considered  as  including  those generated by custom
              dependencies and are also deleted.  Otherwise  these  files  are
              not deleted.

       -C     Clean up (remove) all regeneratable files generated by latex and
              bibtex or biber.  This is the same as the  -c  option  with  the
              addition of dvi, postscript and pdf files, and those with exten-
              sions in the $clean_full_ext configuration variable.

              This cleanup is instead of a regular make.  See the  -gg  option
              if you want to do a cleanup than a make.

              If  $bibtex_use  is set to 0 or 1, bbl files are counted as non-



                                 30 March 2012                               4





LATEXMK(1L)                                                        LATEXMK(1L)


              regeneratable.

              If $cleanup_includes_cusdep_generated is nonzero,  regeneratable
              files  are  considered  as  including  those generated by custom
              dependencies and are also deleted.  Otherwise  these  files  are
              not deleted.

       -CA    (Obsolete).   Now  equivalent to the -C option.  See that option
              for details.

       -CF    Remove the file containing the database of source file  informa-
              tion, before doing the other actions requested.

       -d     Set  draft  mode.  This prints the banner message "DRAFT" across
              your page when converting the dvi file to postscript.  Size  and
              intensity can be modified with the -bs and -bi options.  The -bm
              option will override this option as this is really just a  short
              way of specifying:

                   latexmk -bm DRAFT

              Note  that  if  the  -d  option  is specified, the -ps option is
              assumed.

       -deps  Show a list of dependent files after processing.  This is in the
              form  of a dependency list of the form used by the make program,
              and it is therefore suitable for use in a Makefile.  It gives an
              overall view of the files without listing intermediate files, as
              well as latexmk can determine them.

              By default the list of dependent files is sent to stdout  (i.e.,
              normally  to  the screen unless you've redirected latexmk's out-
              put).  But you can set the filename where the list  is  sent  by
              the -deps-out= option.

              See  the section "USING latexmk WITH make" for an example of how
              to use a dependency list with make.

              Users familiar with GNU automake and  gcc  will  find  that  the
              -deps  option  is very similar in its purpose and results to the
              -M option to gcc.  (In fact, latexmk also has options  -M,  -MF,
              and -MP options that behave like those of gcc.)

       -dependents
              Equivalent to -deps.

       -deps- Do  not  show a list of dependent files after processing.  (This
              is the default.)

       -dependents-
              Equivalent to -deps-.

       -deps-out=FILENAME
              Set the filename  to  which  the  list  of  dependent  files  is



                                 30 March 2012                               5





LATEXMK(1L)                                                        LATEXMK(1L)


              written.   If  the  FILENAME  argument is omitted or set to '-',
              then the output is sent to stdout.

              Use of this option also turns on  the  output  of  the  list  of
              dependent files after processing.

       -dF    Dvi  file  filtering.   The  argument to this option is a filter
              which will generate a  filtered  dvi  file  with  the  extension
              ".dviF".   All  extra processing (e.g. conversion to postscript,
              preview, printing) will then be performed on this  filtered  dvi
              file.

              Example usage: To use dviselect to select only the even pages of
              the dvi file:

                   latexmk -dF 'dviselect even' foo.tex

       -diagnostics
              Print detailed diagnostics during a  run.   This  may  help  for
              debugging problems or to understand latexmk's behavior in diffi-
              cult situations.

       -dvi   Generate dvi version of document.

       -dvi-  Turn off generation of dvi version of document.  (This  may  get
              overridden,  if  some other file is made (e.g., a .ps file) that
              is generated from the dvi file, or if no generated file  at  all
              is requested.)

       -e <code>
              Execute  the  specified  initialization  code before processing.
              The code is Perl code of the same form as is used  in  latexmk's
              initialization files -- for more details, see the information on
              the -r option, and the section about  "Configuration/initializa-
              tion  (RC)  files".  The code is typically a sequence of assign-
              ment statements separated by semicolons.

              The code is executed when the -e option  is  encountered  during
              latexmk's  parsing of its command line.  See the -r option for a
              way of executing initialization code  from  a  file.   An  error
              results  in  latexmk stopping.  Multiple instances of the -r and
              -e options can be used, and they are executed in the order  they
              appear on the command line.

              Some care is needed to deal with proper quoting of special char-
              acters in the code on the command line.   For  example,  suppose
              you  want  to  set  the  latex  command to use its -shell-escape
              option, then under UNIX/LINUX you could use the line

                   latexmk -e '$latex=q/latex %O -shell-escape %S/' file.tex

              Note that the single  quotes  block  normal  UNIX/LINUX  command
              shells  from  treating  the characters inside the quotes as spe-
              cial.  (In this example, the q/.../ construct is  a  Perl  idiom



                                 30 March 2012                               6





LATEXMK(1L)                                                        LATEXMK(1L)


              equivalent  to  using  single quotes.  This avoids the complica-
              tions of getting a quote  character  inside  an  already  quoted
              string  in  a  way that is independent of both the shell and the
              operating-system.)

              The above command line  will  NOT  work  under  MS-Windows  with
              cmd.exe  or  command.com  or 4nt.exe.  For MS-Windows with these
              command shells you could use

                   latexmk -e "$latex=q/latex %O -shell-escape %S/" file.tex

              or

                   latexmk -e "$latex='latex %O -shell-escape %S'" file.tex

              The last two examples will  NOT  work  with  UNIX/LINUX  command
              shells.

       -f     Force  latexmk  to  continue document processing despite errors.
              Normally, when latexmk detects that LaTeX or another program has
              found an error which will not be resolved by further processing,
              no further processing is carried out.

       -f-    Turn off the forced processing-past-errors such as is set by the
              -f  option.   This could be used to override a setting in a con-
              figuration file.

       -g     Force latexmk to process document fully, even  under  situations
              where  latexmk  would  normally  decide  that  no changes in the
              source files have occurred since the previous run.  This  option
              is  useful,  for example, if you change some options and wish to
              reprocess the files.

       -g-    Turn off -g.

       -gg    "Super go mode" or "clean make": clean out generated files as if
              -C had been given, and then do a regular make.

       -h, -help
              Print help information.

       -l     Run in landscape mode, using the landscape mode for the preview-
              ers and the dvi to postscript converters.  This  option  is  not
              normally  needed  nowadays,  since  current  previewers normally
              determine this information automatically.

       -l-    Turn off -l.

       -latex='command'
              This sets the string specifying the command to run latex, and is
              typically  used  to  add desired options.  Since the string nor-
              mally contains spaces, it should be quoted, e.g.,

                   latex -latex='latex --shell-escape %O %S'  foo.tex



                                 30 March 2012                               7





LATEXMK(1L)                                                        LATEXMK(1L)


              The specification of the contents of the string are the same  as
              for  the $latex configuration variable.  Depending on your oper-
              ating system and the command-line shell you are using,  you  may
              need  to change the single quotes to double quotes (or something
              else).

              To set the command for running pdflatex (rather than the command
              for latex) see the -pdflatex option.

              Note  that  the  effect  of  this option can also be achieved by
              using the -e option with a suitable line of Perl code to set the
              $latex variable.  See the explanation of the -e option.

       -M     Show  list of dependent files after processing.  This is equiva-
              lent to the -deps option.

       -MF file
              If a list of dependents is made, the -MF specifies the  file  to
              write it to.

       -MP    If  a list of dependents is made, includes phony target for each
              source file.  If you use the dependents list in a Makefile,  the
              dummy  rules  work around errors make gives if you remove header
              files without updating the Makefile to match.

       -new-viewer
              When in continuous-preview mode, always start a  new  viewer  to
              view  the generated file.  By default, latexmk will, in continu-
              ous-preview mode, test for a previously  running  previewer  for
              the same file and not start a new one if a previous previewer is
              running.  However, its test sometimes fails (notably if there is
              an  already-running previewer that is viewing a file of the same
              name as the current file, but in a different  directory).   This
              option turns off the default behavior.

       -new-viewer-
              The  inverse  of the -new-viewer option.  It puts latexmk in its
              normal behavior that in preview-continuous mode it checks for an
              already-running previewer.

       -nobibtex
              Never run bibtex or biber.

              A  common  use  for this option is when a document comes from an
              external source, complete with its bbl  file(s),  and  the  user
              does  not  have  the corresponding bib files available.  In this
              situation use of the -nobibtex option will prevent latexmk  from
              trying to run bibtex or biber, which would result in overwriting
              of the bbl files.

       -norc  Turn off the automatic reading of initialization (rc) files.

              N.B. Normally the initialization files are read and obeyed,  and
              then  command  line  options  are  obeyed  in the order they are



                                 30 March 2012                               8





LATEXMK(1L)                                                        LATEXMK(1L)


              encountered.  Then -norc is an exception to  this  rule:  it  is
              acted on first, no matter where is occurs on the command line.


       -outdir=FOO or -output-directory=FOO

              Sets  the  directory  for  the output files of (pdf)latex.  This
              achieves  its  effect  by  the   -output-directory   option   of
              (pdf)latex,  which  currently  (Dec. 2011) is implemented on the
              common versions of (pdf)latex, i.e., MiKTeX and TeXLive.  It may
              not be present in other versions.

              See  also  the -auxdir/-aux-directory options, and the $aux_dir,
              $out_dir, and $search_path_separator configuration variables  of
              latexmk.   In  particular, see the documentation of $out_dir for
              some complications on what directory names are suitable.



       -p     Print out the document.  By default it is  the  generated  post-
              script  file  that  is  printed.  But you can use the -print=...
              option to print the dvi or pdf files instead, and you  can  con-
              figure this in a start up file (by setting the $print_type vari-
              able).

              However, printing is enabled by default  only  under  UNIX/LINUX
              systems,  where  the default is to use the lpr command.  In gen-
              eral, the correct behavior for printing  very  much  depends  on
              your  system's  software.   In  particular, under MS-Windows you
              must have suitable program(s) available, and you must have  con-
              figured  the  print  commands used by latexmk.  This can be non-
              trivial.  See the  documentation  on  the  $lpr,  $lpr_dvi,  and
              $lpr_pdf  configuration variables to see how to set the commands
              for printing.

              This option is incompatible with the -pv and -pvc options, so it
              turns them off.

       -pdf   Generate  pdf  version  of  document  using  pdflatex.  (See the
              -xelatex if you wish to use xelatex to make your pdf file(s).)

       -pdfdvi
              Generate pdf version of document from the dvi file,  by  default
              using dvipdf.

       -pdfps Generate  pdf  version  of document from the ps file, by default
              using ps2pdf.

       -pdf-  Turn off generation of pdf version of document.   (This  can  be
              used  to override a setting in a configuration file.  It may get
              overridden if some other option requires the generation of a pdf
              file.)





                                 30 March 2012                               9





LATEXMK(1L)                                                        LATEXMK(1L)


       -pdflatex='command'
              This sets the string specifying the command to run pdflatex, and
              is typically used to add desired options.  Since the string nor-
              mally contains spaces, it should be quoted, e.g.,

                   latex   -pdf   -pdflatex='pdflatex  --shell-escape  %O  %S'
              foo.tex

              The specification of the contents of the string are the same  as
              for  the  $pdflatex  configuration  variable.  Depending on your
              operating system and the command-line shell you are  using,  you
              may  need to change the single quotes to double quotes (or some-
              thing else).

              To set the command for running latex (rather  than  the  command
              for pdflatex) see the -latex option.

              Note  that  the  effect  of  this option can also be achieved by
              using the -e option with a suitable line of Perl code to set the
              $pdflatex variable. See the explanation of the -e option.

       -print=dvi, -print=ps, -print=pdf
              Define  which kind of file is printed.  This option also ensures
              that the requisite file is made, and  turns  on  printing.   The
              default is to print a postscript file.

       -ps    Generate postscript version of document.

       -ps-   Turn off generation of postscript version of document.  This can
              be used to override a setting in a configuration file.  (It  may
              get  overridden  by some other option that requires a postscript
              file, for example a request for printing.)

       -pF    Postscript file filtering.  The argument to  this  option  is  a
              filter  which  will generate a filtered postscript file with the
              extension ".psF".  All extra processing (e.g. preview, printing)
              will then be performed on this filtered postscript file.

              Example of usage: Use psnup to print two pages on the one page:

                   latexmk -ps -pF 'psnup -2' foo.tex

              or

                   latexmk -ps -pF "psnup -2" foo.tex

              Whether to use single or double quotes round the "psnup -2" will
              depend on your command interpreter, as used  by  the  particular
              version of perl and the operating system on your computer.

       -pv    Run  file  previewer.   If  the  -view option is used, this will
              select the kind of file to be previewed (dvi, ps or pdf).   Oth-
              erwise  the viewer views the "highest" kind of file selected, by
              the -dvi, -ps, -pdf, -pdfps options, in the order dvi,  ps,  pdf



                                 30 March 2012                              10





LATEXMK(1L)                                                        LATEXMK(1L)


              (low  to high).  If no file type has been selected, the dvi pre-
              viewer will be used.  This option is incompatible  with  the  -p
              and -pvc options, so it turns them off.

       -pv-   Turn off -pv.

       -pvc   Run  a  file  previewer  and  continually  update the .dvi, .ps,
              and/or .pdf files whenever changes are made to source files (see
              the  Description  above).  Which of these files is generated and
              which is viewed is governed by the other  options,  and  is  the
              same  as for the -pv option.  The preview-continuous option -pvc
              can only work with one file.  So in this case you will  normally
              only  specify  one  filename  on  the  command line.  It is also
              incompatible with the -p and -pv  options,  so  it  turns  these
              options off.

              The  -pvc  option also turns off force mode (-f), as is normally
              best for continuous preview mode.   If  you  really  want  force
              mode, use the options in the order -pvc -f.

              With a good previewer the display will be automatically updated.
              (Under some but not all versions of UNIX/Linux "gv -watch"  does
              this  for  postscript  files; this can be set by a configuration
              variable.  This would also work for  pdf  files  except  for  an
              apparent  bug  in gv that causes an error when the newly updated
              pdf file is read.)  Many other previewers  will  need  a  manual
              update.

              Important note: the acroread program on MS-Windows locks the pdf
              file, and prevents new versions being written, so it  is  a  bad
              idea  to  use  acroread  to view pdf files in preview-continuous
              mode.  It is better to use a dvi or ps viewer, as set by one  of
              the -view=dvi and -view=ps options.

              There  are  some  other methods for arranging an update, notably
              useful for many versions of xdvi and xpdf.  These are  best  set
              in latexmk's configuration; see below.

              Note  that  if  latexmk  dies  or  is  stopped  by the user, the
              "forked" previewer will continue to run.  Successive invocations
              with  the  -pvc option will not fork new previewers, but latexmk
              will normally use the existing previewer.  (At least  this  will
              happen  when  latexmk is running under an operating system where
              it knows how to determine whether an existing previewer is  run-
              ning.)

       -pvc-  Turn off -pvc.

       -quiet Same as -silent

       -r <rcfile>
              Read  the  specified initialization file ("RC file") before pro-
              cessing.




                                 30 March 2012                              11





LATEXMK(1L)                                                        LATEXMK(1L)


              Be careful about the ordering: (1) Standard initialization files
              --  see  the section below on "Configuration/initialization (RC)
              files" -- are read first.  (2) Then the options on  the  command
              line  are acted on in the order they are given.  Therefore if an
              initialization file is specified by the -r option,  it  is  read
              during  this second step.  Thus an initialization file specified
              with the -r option can override both the standard initialization
              files and previously specified options.  But all of these can be
              overridden by later options.

              The contents of the RC file just comprise a piece of code in the
              Perl  programming  language  (typically a sequence of assignment
              statements); they are executed when the -r option is encountered
              during latexmk's parsing of its command line.  See the -e option
              for a way of giving initialization code  directly  on  latexmk's
              command  line.   An error results in latexmk stopping.  Multiple
              instances of the -r and -e options can be  used,  and  they  are
              executed in the order they appear on the command line.

       -recorder
              Use  the  -recorder  option  with latex and pdflatex.  In (most)
              modern versions of these programs, this results  in  a  file  of
              extension  .fls  containing  a list of the files that these pro-
              grams have read and written.  Latexmk will then use this file to
              improve  its detection of source files and generated files after
              a run of latex or pdflatex.

              For further information, see the documentation for the $recorder
              configuration variable.

       -recorder-
              Do not use the -recorder option with latex and pdflatex.

       -rules Show a list of latemk's rules and dependencies after processing.

       -rules-
              Do  not  show  a  list of latexmk's rules and dependencies after
              processing.  (This is the default.)

       -silent
              Run commands silently, i.e., with options that reduce the amount
              of  diagnostics  generated.   For example, with the default set-
              tings, the command "latex -interaction=batchmode"  is  used  for
              latex.

              Also  reduce  the  number of informational messages that latexmk
              generates.

              To change the options used to make the  commands  run  silently,
              you need to configure latexmk with changed values of its config-
              uration   variables,   the    relevant    ones    being    $bib-
              tex_silent_switch,  $biber_silent_switch,  $dvips_silent_switch,
              $latex_silent_switch, and $pdflatex_silent_switch.




                                 30 March 2012                              12





LATEXMK(1L)                                                        LATEXMK(1L)


       -use-make
              When after a run of latex or pdflatex, there are warnings  about
              missing files (e.g., as requested by the LaTeX \input, \include,
              and \includgraphics), latexmk tries to make  them  by  a  custom
              dependency. If no relevant custom dependency with an appropriate
              source file is found, and if the -use-make option is  set,  then
              latexmk  will  try  as a resort using the make program to try to
              make the missing files.

              Note that the filename may be specified  without  an  extension,
              e.g.,  by  \includegraphics{drawing}  in  a LaTeX file.  In that
              case, latexmk will try making drawing.ext with ext set  in  turn
              to  the  possible  extensions that are relevant for latex (or as
              appropriate pdflatex).

              See also the documentation for  the  $use_make_for_missing_files
              configuration variable.

       -use-make-
              Do  not  use  the  make  program  to  try to make missing files.
              (Default.)

       -v, -version
              Print version number of latexmk.

       -verbose
              Opposite of -silent.  This is the default setting.

       -view=default, -view=dvi, -view=ps, -view=pdf
              Set the kind of file used when previewing is requested (e.g., by
              the -pv or -pvc switches).  The default is to view the "highest"
              kind of requested file (in the order dvi, ps, pdf).

       -xelatex
              Use xelatex.  That is, use xelatex to process the source file(s)
              to  pdf  (in place of pdflatex).  This option is exactly equiva-
              lent to specifying the following sequence of options:

                   -pdflatex="xelatex %O %S" -pdf -dvi- -ps


       The preview-continuous option -pvc can only work with one file.  So  in
       this  case  you  will normally only specify one filename on the command
       line.

       Options -p, -pv and -pvc are mutually  exclusive.   So  each  of  these
       options turns the others off.


EXAMPLES
       % latexmk thesis    # run latex enough times to resolve
                           cross-references

       % latexmk -pvc -ps thesis# run latex enough times to resolve



                                 30 March 2012                              13





LATEXMK(1L)                                                        LATEXMK(1L)


                           cross-references, make a postscript
                           file, start a previewer.  Then
                           watch for changes in the source
                           file thesis.tex and any files it
                           uses.  After any changes rerun latex
                           the appropriate number of times and
                           remake the postscript file.  If latex
                           encounters an error, latexmk will
                           keep running, watching for
                           source file changes.

       % latexmk -c        # remove .aux, .log, .bbl, .blg, .dvi,
                           .pdf, .ps & .bbl files



CONFIGURATION/INITIALIZATION (RC) FILES
       Latexmk can be customized using initialization files, which are read at
       startup in the following order:

       1) The system RC file, if it exists.
          On a UNIX system, latexmk searches for following places for its sys-
       tem RC file, in the following order, and reads the first it finds:
          "/opt/local/share/latexmk/LatexMk",
          "/usr/local/share/latexmk/LatexMk",
          "/usr/local/lib/latexmk/LatexMk".
          On a MS-WINDOWS system it looks for "C:\latexmk\LatexMk".
          On  a cygwin system (i.e., a MS-Windows system in which perl is that
       of cygwin), latexmk reads for the first it finds of
          "/cygdrive/c/latexmk/LatexMk",
          "/opt/local/share/latexmk/LatexMk",
          "/usr/local/share/latexmk/LatexMk",
          "/usr/local/lib/latexmk/LatexMk".

       2) The user's RC file, "$HOME/.latexmkrc", if it exists.  Here $HOME is
       the  user's home directory.  [Latexmk determines the user's home direc-
       tory as follows:  It is the value of the environment variable HOME,  if
       this  variable  exists, which normally is the case on UNIX-like systems
       (including LINUX and OS-X).  Otherwise the environment  variable  USER-
       PROFILE is used, if it exists, which normally is the case on MS-Windows
       systems. Otherwise a blank string is used instead of $HOME.]

       3) The RC file in the current working  directory.   This  file  can  be
       named  either "latexmkrc" or ".latexmkrc", and the first of these to be
       found is used, if any.

       4) Any RC file(s) specified on the command line with the -r option.

       Each RC file is a sequence of Perl commands.  Naturally, a user can use
       this  in  creative  ways.   But  for  most  purposes, one simply uses a
       sequence of assignment statements that override some  of  the  built-in
       settings  of  Latexmk.   Straightforward  cases  can be handled without
       knowledge of the Perl language by using the examples in  this  document
       as templates.  Comment lines are introduced by the "#" character.



                                 30 March 2012                              14





LATEXMK(1L)                                                        LATEXMK(1L)


       Note  that  command  line options are obeyed in the order in which they
       are written; thus any RC file specified on the command line with the -r
       option  can  override  previous options but can be itself overridden by
       later options on the command line.  There is also the -e option,  which
       allows initialization code to be specified in latexmk's command line.

         For  possible  examples  of code for in an RC file, see the directory
       example_rcfiles   in   the   distribution   of   latexmk   (e.g.,    at
       http://ctan.tug.org/tex-archive/support/latexmk/example_rcfiles).


HOW TO SET VARIABLES IN INITIALIZATION FILES
       The  important  variables  that  can be configured are described in the
       section "List  of  configuration  variables  usable  in  initialization
       files".  Syntax for setting these variables is of the following forms:

                           $bibtex = 'bibtex %O %B';

       for the setting of a string variable,

                           $preview_mode = 1;

       for the setting of a numeric variable, and

                           @default_files = ('paper', 'paper1');

       for  the  setting  of an array of strings.  It is possible to append an
       item to an array variable as follows:

                           push @default_files, 'paper2';

       Note that simple "scalar" variables have names  that  begin  with  a  $
       character and array variables have names that begin with a @ character.
       Each statement ends with a semicolon.

       Strings should be enclosed in single quotes.   (You  could  use  double
       quotes,  as  in many programming languages.  But then the Perl program-
       ming language brings into play some  special  rules  for  interpolating
       variables  into  strings.  People not fluent in Perl will want to avoid
       these complications.)

       You can do much more complicated things, but for this you will need  to
       consult a manual for the Perl programming language.




FORMAT OF COMMAND SPECIFICATIONS
       Some  of  the variables set the commands that latexmk uses for carrying
       out its work, for example to generate a dvi file from a tex file or  to
       view a postscript file.  This section describes some important features
       of how the commands are specified.

       Placeholders:  Supposed you wanted latexmk to use the command elatex in



                                 30 March 2012                              15





LATEXMK(1L)                                                        LATEXMK(1L)


       place  of  the  regular  latex  command,  and suppose moreover that you
       wanted to give it the option "--shell-escape".  You could  do  this  by
       the following setting:

            $latex = 'elatex --shell-escape %O %S';

       The  two  items  starting with the % character are placeholders.  These
       are substituted by appropriate values before the command is run.   Thus
       %S  will be replaced by the source file that elatex will be applied to,
       and %O will be replaced by any options that latexmk has decided to  use
       for  this  command.   (E.g.,  if  you  used the -silent option it would
       replace %O by "-interaction=batchmode".)

       The available placeholders are:

       %B     base of filename for current command.   E.g.,  if  a  postscript
              file  document.ps  is being made from the dvi file document.dvi,
              then the basename is document.

       %D     destination file (e.g., the name of  the  postscript  file  when
              converting a dvi file to postscript).

       %O     options

       %R     root filename.  This is the base name for the main tex file.

       %S     source  file  (e.g.,  the name of the dvi file when converting a
              dvi file to ps).

       %T     The name of the primary tex file.  %Y Name of directory for aux-
              iliary  output  files (see the configuration variable $aux_dir).
              A directory separation character ('/') is appended  if  $aux_dir
              is  non-empty  and  does  not  end in a suitable character, with
              suitable characters being those appropriate to UNIX and  MS-Win-
              dows,  i.e.,  ':', '/' and '\'.  %Z Name of directory for output
              files (see the configuration variable  $out_dir).   A  directory
              separation  character ('/') is appended if $out_dir is non-empty
              and does not end in a suitable character, with suitable  charac-
              ters  being those appropriate to UNIX and MS-Windows, i.e., ':',
              '/' and '\'.

       If for some reason you need a literal % character in  your  string  not
       subject  to the above rules, use a pair of these characters.  Thus with
       the command specification $ps_previewer =  'latex  -ad=%%Sfile.ad  %S',
       the %%S will become %S when the command is executed, but the %S will be
       replaced by the source filename, which in this case would be  the  name
       of a postscript file to be viewed.

       Appropriate  quoting  will be applied to the filename substitutions, so
       you mustn't supply them yourself even if the names of your  files  have
       spaces in them.  (But if your TeX filenames have spaces in them, beware
       that many versions of the TeX program cannot correctly handle filenames
       containing  spaces.)  In case latexmk's quoting does not work correctly
       on your system, you can turn it off -- see the  documentation  for  the



                                 30 March 2012                              16





LATEXMK(1L)                                                        LATEXMK(1L)


       variable $quote_filenames.

       The  distinction  between %B and %R needs a bit of care, since they are
       often the same, but not always.  For example on a simple document,  the
       basename of a bibtex run is the same as for the texfile.  But in a doc-
       ument with several bibliographies, the bibliography files will  have  a
       variety  of  names.   Since  bibtex is invoked with the basename of the
       bibliography file, the setting for the bibtex command should  therefore
       be

            $bibtex = 'bibtex %O %B';

       Generally,  you  should use %B rather than %R.  Similarly for most pur-
       poses, the name %T of the primary texfile is not a useful placeholder.

       See the default values in the section "List of configuration  variables
       usable in initialization files" for what is normally the most appropri-
       ate usage.

       If you omit to supply any placeholders whatever in the specification of
       a  command,  latexmk will supply what its author thinks are appropriate
       defaults.  This gives compatibility with configuration files for previ-
       ous versions of latexmk, which didn't use placeholders.

       "Detaching"  a  command: Normally when latexmk runs a command, it waits
       for the command to run to completion.  This is appropriate for commands
       like latex, of course.  But for previewers, the command should normally
       run detached, so that latexmk  gets  the  previewer  running  and  then
       returns to its next task (or exits if there is nothing else to do).  To
       achieve this effect of detaching a command, you  need  to  precede  the
       command name with "start ", as in

            $dvi_previewer = 'start xdvi %O %S';

       This  will  be translated to whatever is appropriate for your operating
       system.

       Notes: (1) In some circumstances,  latex  will  always  run  a  command
       detached.  This is the case for a previewer in preview continuous mode,
       since otherwise previewing continuously makes no sense.  (2) This  pre-
       cludes  the  possibility  of running a command named start.  (3) If the
       word start occurs more than  once  at  the  beginning  of  the  command
       string,  that is equivalent to having just one.  (4) Under cygwin, some
       complications happen, since cygwin amounts to a complicated merging  of
       UNIX  and  MS-Windows.   See  the  source code for how I've handled the
       problem.

       Command names containing spaces: Under MS-Windows it is common that the
       name of a command includes spaces, since software is often installed in
       a subdirectory of "C:\Program Files".  Such  command  names  should  be
       enclosed in double quotes, as in

            $lpr_pdf  =  '"c:/Program  Files/Ghostgum/gsview/gsview32.exe"  /p
       %S';



                                 30 March 2012                              17





LATEXMK(1L)                                                        LATEXMK(1L)


            $pdf_previewer   =   'start   "c:/Program   Files/SumatraPDF/Suma-
       traPDF.exe" %O %S';
            $pdf_previewer  =  'start "c:/Program Files/SumatraPDF (x86)/Suma-
       traPDF.exe" %O %S';


       (Note about the above example: Forward slashes are equivalent to  back-
       slashes  in  filenames  under MS-Windows, provided that the filename is
       inside double quotes.  It is easier to use forward slashes in  examples
       like  the  one  above,  since then one does not have to worry about the
       rules for dealing with forward slashes in  strings  in  the  Perl  lan-
       guage.)

       Command  names  under  Cygwin: If latexmk is executed by Cygwin's perl,
       be particularly certain that pathnames in commands have forward slashes
       not  the  usual  backslashes  for the separator of pathname components.
       See the above examples.  Backslashes often get  misinterpreted  by  the
       Unix shell used by Cygwin's Perl to execute external commands.  Forward
       slashes don't suffer from this problem, and (when quoted, as above) are
       equally acceptable to MS-Windows.

       Using  MS-Windows  file  associations: A useful trick under modern ver-
       sions of MS-Windows (e.g., WinXP) is to use just the command 'start' by
       itself:

            $dvi_previewer = 'start %S';

       Under recent versions of MS-Windows, this will cause to be run whatever
       program the system has associated with dvi files.   (The  same  applies
       for a postscript viewer and a pdf viewer.)  But note that this trick is
       not always suitable for the pdf previwer, if your system  has  acroread
       for the default pdf viewer.  As explained elsewhere, acroread under MS-
       Windows does not work well with latex  and  latexmk,  because  acroread
       locks the pdf file.

       Not using a certain command: If a command is not to be run, the command
       name NONE is used, as in

            $lpr  = 'NONE lpr';

       This typically is used when an appropriate command does  not  exist  on
       your system.  The string after the "NONE" is effectively a comment.

       Options to commands: Setting the name of a command can be used not only
       for changing the name of the command called, but also to add options to
       command.   Suppose  you  want latexmk to use latex with source specials
       enabled.  Then you might use the following line  in  an  initialization
       file:

            $latex = 'latex --src-specials %O %S';

       Running  a  subroutine instead of an external command: Use a specifica-
       tion starting with "internal", as in




                                 30 March 2012                              18





LATEXMK(1L)                                                        LATEXMK(1L)


            $latex = 'internal mylatex %O %S';
            sub mylatex {
                my @args = @_;
                # Possible preprocessing here
                return system 'latex', @args;
            }

       Advanced tricks: Normally one specifies a single command for  the  com-
       mands  invoked  by  latexmk.   Naturally,  if there is some complicated
       additional processing you need to do in your special situation, you can
       write a script (or batch file) to do the processing, and then configure
       latexmk to use your script in place of the standard program.

       It is also possible to configure latexmk to run multiple commands.  For
       example,  if  when  running  pdflatex to generate a pdf file from a tex
       file you need to run another program after  pdflatex  to  perform  some
       extra processing, you could do something like:

            $pdflatex  =  'pdflatex  --shell-escape %O %S; pst2pdf_for_latexmk
       %B';

       This definition  assumes  you  are  using  a  UNIX-like  system  (which
       includes  Linux and OS-X), so that the two commands to be run are sepa-
       rated by the semicolon in the middle of the string.

       If you are using MS-Windows, you would replace the above line by

          $pdflatex = 'cmd /c pdflatex --shell-escape %O %S'
                      . '&& pst2pdf_for_latexmk %B';

       Here, the UNIX command separator ; is replaced  by  &&.   In  addition,
       there is a problem that some versions of Perl on MS-Windows do not obey
       the command separator; this problem is overcome by explicitly  invoking
       the MS-Windows command-line processor cmd.exe.


LIST OF CONFIGURATION VARIABLES USABLE IN INITIALIZATION FILES
       Default values are indicated in brackets.

       $always_view_file_via_temporary [0]
              Whether ps and pdf files are initially to be made in a temporary
              directory and then moved to the final location.   (This  applies
              to dvips, dvipdf, and ps2pdf operations, and the filtering oper-
              ators on dvi and ps files.   It  does  not  apply  to  pdflatex,
              unfortunately.)

              This use of a temporary file solves a problem that the making of
              these files can occupy a substantial time.   If  a  viewer  sees
              that  the  file has changed, it reads the new file, and this can
              cause havoc if the program writing the file has not yet finished
              its work.

              See the $pvc_view_file_via_temporary variable for a setting that
              applies only if preview-continuous mode (-pvc option)  is  used.



                                 30 March 2012                              19





LATEXMK(1L)                                                        LATEXMK(1L)


              See $tmpdir for the setting of the directory where the temporary
              file is created.


       $auto_rc_use [1]
              Whether to automatically read the standard  initialization  (rc)
              files, which are the system RC file, the user's RC file, and the
              RC file in the current directory.  The command line option -norc
              can  be  used to turn this setting off.  Each RC file could also
              turn this setting off, i.e., it could set $auto_rc_use  to  zero
              to prevent automatic reading of the later RC files.

              This  variable does not affect the reading of RC files specified
              on the command line by the -r option.


       $aux_dir [""]
              The directory in which auxiliary files (aux, log, etc) are to be
              written  by  a  run of (pdf)latex.  If this variable is not set,
              but $out_dir is set, then $aux_dir is set to $out_dir, which  is
              the directory to which general output files are to be written.

              Important  note:   The  effect  of  $aux_dir,  if different from
              $out_dir, is achieved by giving (pdf)latex  the  -aux-directory.
              Currently  (Dec.  2011) this only works on the MiKTeX version of
              (pdf)latex.

              See also the documentation of $out_dir for some complications on
              what directory names are suitable.


       $banner [0]
              If  nonzero, the banner message is printed across each page when
              converting the dvi file to postscript.   Without  modifying  the
              variable  $banner_message,  this is equivalent to specifying the
              -d option.

              Note that if $banner is nonzero, the $postscript_mode is assumed
              and the postscript file is always generated, even if it is newer
              than the dvi file.

       $banner_intensity [0.95]
              Equivalent to the -bi option, this is a decimal number between 0
              and  1 that specifies how dark to print the banner message. 0 is
              black, 1 is white.  The default is just right if your toner car-
              tridge isn't running too low.

       $banner_message ["DRAFT"]
              The banner message to print across each page when converting the
              dvi file to postscript.  This is equivalent to the -bm option.

       $banner_scale [220.0]
              A decimal number that specifies how  large  the  banner  message
              will  be printed.  Experimentation is necessary to get the right



                                 30 March 2012                              20





LATEXMK(1L)                                                        LATEXMK(1L)


              scale for your message, as a rule of thumb the scale  should  be
              about  equal  to 1100 divided by the number of characters in the
              message.  The Default is just right for  5  character  messages.
              This is equivalent to the -bs option.

       @BIBINPUTS
              This  is  an array variable, now mostly obsolete, that specifies
              directories where  latexmk  should  look  for  .bib  files.   By
              default it is set from the BIBINPUTS environment variable of the
              operating system.  If that environment variable is  not  set,  a
              single  element list consisting of the current directory is set.
              The format of the directory names depends on your operating sys-
              tem, of course.  Examples for setting this variable are:

                      @BIBINPUTS = ( ".", "C:\bibfiles" );
                      @BIBINPUTS = ( ".", "\\server\bibfiles" );
                      @BIBINPUTS = ( ".", "C:/bibfiles" );
                      @BIBINPUTS = ( ".", "//server/bibfiles" );
                      @BIBINPUTS = ( ".", "/usr/local/texmf/bibtex/bib" );

              Note  that  under  MS  Windows,  either a forward slash "/" or a
              backward slash "\" can be used to separate pathname  components,
              so  the  first  two  and the second two examples are equivalent.
              Each backward slash should be doubled to avoid running afoul  of
              Perl's rules for writing strings.

              Important note: This variable is now mostly obsolete in the cur-
              rent version of latexmk, since it has a better method of search-
              ing  for  files  using  the kpsewhich command.  However, if your
              system is an unusual one without the kpsewhich command, you  may
              need to set the variable @BIBINPUTS.

       $biber ["biber %O %S"]
              The biber processing program.

       $biber_silent_switch ["--onlylog"]
              Switch(es)  for the biber processing program when silent mode is
              on.

       $bibtex ["bibtex %O %S"]
              The BibTeX processing program.

       $bibtex_silent_switch ["-terse"]
              Switch(es) for the BibTeX processing program when silent mode is
              on.

       $bibtex_use [1]
              Under what conditions to run BibTeX or biber.  When latexmk dis-
              covers from the log file that one (or more)  BibTeX/biber-gener-
              ated  bibliographies  are used, it can run BibTeX or biber when-
              ever it appears necessary to regenerate  the  bbl  file(s)  from
              their source bib database file(s).

              But  sometimes,  the  bib file(s) are not available (e.g., for a



                                 30 March 2012                              21





LATEXMK(1L)                                                        LATEXMK(1L)


              document obtained from an external archive), but the  bbl  files
              are  provided.   In that case use of BibTeX or biber will result
              in incorrect overwriting of the precious bbl files.   The  vari-
              able  $bibtex_use  controls  whether this happens.  Its possible
              values are: 0: never use BibTeX or biber.  1: only use BibTeX or
              biber  if  the bib files exist.  2: run BibTeX or biber whenever
              it appears necessary to update the bbl  files,  without  testing
              for the existence of the bib files.

       $cleanup_includes_cusdep_generated [0]
              If  nonzero,  specifies that cleanup also deletes files that are
              generated by custom dependencies.  (When doing a clean up, e.g.,
              by use of the -C option, custom dependencies are those listed in
              the .fdb_latexmk file from a previous run.)

       $cleanup_includes_generated [0]
              If nonzero, specifies that cleanup also deletes files  that  are
              detected  in log file as being generated (see the \openout lines
              in the log file).  It will also include files  made  from  these
              first generation generated files.

       $cleanup_mode [0]
              If  nonzero,  specifies  cleanup mode: 1 for full cleanup, 2 for
              cleanup except for dvi, ps and pdf files, 3 for  cleanup  except
              for  dep and aux files.  (There is also extra cleaning as speci-
              fied by  the  $clean_ext,  $clean_full_ext  and  @generated_exts
              variables.)

              This  variable  is  equivalent to specifying one of the -c or -C
              options.  But there should be no need to set this variable  from
              an RC file.

       $clean_ext [""]
              Extra  extensions of files for latexmk to remove when any of the
              clean-up options (-c or -C) is  selected.   The  value  of  this
              variable is a string containing the extensions separated by spa-
              ces.

              It is also possible to specify a more general pattern of file to
              be  deleted, by using the place holder %R, as in commands.  Thus
              setting

                 $clean_ext = "out %R-blx.bib";

              in an initialization file will imply that when a clean-up opera-
              tion  is  specified,  not  only  is  the  standard  set of files
              deleted, but also files of the  form  FOO.out  and  FOO-blx.bib,
              where  FOO  stands  for the basename of the file being processed
              (as in FOO.tex).


       $clean_full_ext [""]
              Extra extensions of files for latexmk  to  remove  when  the  -C
              option is selected, i.e., extensions of files to remove when the



                                 30 March 2012                              22





LATEXMK(1L)                                                        LATEXMK(1L)


              .dvi, etc files are to be cleaned-up.

              More general patterns are allowed, as for $clean_ext.


       $compiling_cmd  [undefined],  $failure_cmd  [undefined],   $success_cmd
       [undefined]

              These  variables  specify  commands that are executed at certain
              points of  compilations  during  preview-continuous  mode.   One
              motivation  for  their  existance  is to allow convenient visual
              indications of compilation status even when the window receiving
              the screen output of the compilation is hidden.

              The  commands  are  executed  at  the following points: $compil-
              ing_cmd at the start of compilation, $success_cmd at the end  of
              a  successful  compilation,  and  $failure_cmd  at the end of an
              unsuccessful compilation.  If any of above  variables  is  unde-
              fined  (the  default situation) or blank, then the corresponding
              command is not executed.

              An example of a typical setting of these variables is as follows

                  $compiling_cmd = "xdotool search  --name  \"%D\"  set_window
              --name \"%D compiling\"";
                  $success_cmd    =  "xdotool  search --name \"%D\" set_window
              --name \"%D OK\"";
                  $failure_cmd   = "xdotool search  --name  \"%D\"  set_window
              --name \"%D FAILURE\"";

              These  assume  that  the  program xdotool is installed, that the
              previewer is using an X-Window system for display, and that  the
              title  of the window contains the name of the displayed file, as
              it normally does.  When the commands are  executed,  the  place-
              holder  string  %D  is  replaced  by the name of the destination
              file, which is the previewed file.  The above commands result in
              an appropriate string being appended to the filename in the win-
              dow title: " compiling", " OK", or " FAILURE".

              Other placeholders that can be used are %S, %T, and %R, with  %S
              and  %T normally being identical. These can be useful for a com-
              mand changing the title of the edit window. The  visual  indica-
              tion  in a window title can useful, since the user does not have
              to keep shifting attention to the (possibly hidden)  compilation
              window to know the status of the compilation.


       @cus_dep_list [()]
              Custom dependency list -- see section on "Custom Dependencies".


       @default_files [("*.tex")]
              Default list of files to be processed.




                                 30 March 2012                              23





LATEXMK(1L)                                                        LATEXMK(1L)


              Normally,  if  no  filenames  are specified on the command line,
              latexmk processes all tex files specified in the  @default_files
              variable,  which by default is set to all tex files ("*.tex") in
              the current directory.  This is a convenience: just run  latexmk
              and  it will process an appropriate set of files.  But sometimes
              you want only some of these files to be processed.  In this case
              you  set the @default_files in an initialization file (e.g., the
              file "latexmkrc" in the current directory).  Then  if  no  files
              are  specified on the command line then the files you specify by
              setting @default_files are processed.

              Three examples:

                   @default_files = ("paper_current");

                   @default_files = ("paper1", "paper2.tex");

                   @default_files = ("*.tex", "*.dtx");

              Note that more than file may be  given,  and  that  the  default
              extension  is  ".tex".  Wild cards are allowed.  The parentheses
              are  because  @default_files  is  an  array  variable,  i.e.,  a
              sequence of filename specifications is possible.

       $dependents_phony [0]
              If  a  list  of dependencies is output, this variable determines
              whether to include a phony target for each source file.  If  you
              use  the  dependents  list  in  a Makefile, the dummy rules work
              around errors make gives if  you  remove  header  files  without
              updating the Makefile to match.

       $dependents_list [0]
              Whether  to  display  a  list(s) of dependencies at the end of a
              run.

       $dvi_filter [empty]
              The dvi file filter to be run on the  newly  produced  dvi  file
              before  other  processing.   Equivalent  to  specifying  the -dF
              option.

       $dvi_mode [See below for default]
              If nonzero, generate a dvi version of the document.   Equivalent
              to the -dvi option.

              The  variable  $dvi_mode  defaults  to  0,  but  if  no explicit
              requests are made for other types  of  file  (postscript,  pdf),
              then  $dvi_mode will be set to 1.  In addition, if a request for
              a file for which a .dvi file is a prerequisite,  then  $dvi_mode
              will be set to 1.

       $dvi_previewer ["start xdvi %O %S" under UNIX]
              The  command  to  invoke  a  dvi-previewer.  [Default is "start"
              under MS-WINDOWS; under more recent versions  of  Windows,  this
              will  cause to be run whatever command the system has associated



                                 30 March 2012                              24





LATEXMK(1L)                                                        LATEXMK(1L)


              with .dvi files.]

              Important note: Normally you will want to have a  previewer  run
              detached, so that latexmk doesn't wait for the previewer to ter-
              minate before continuing its work.  So normally you should  pre-
              fix  the  command  by  "start  ", which flags to latexmk that it
              should do the detaching of the  previewer  itself  (by  whatever
              method  is  appropriate to the operating system).  But sometimes
              letting latexmk do the detaching is not appropriate (for a vari-
              ety  of non-trivial reasons), so you should put the "start " bit
              in yourself, whenever it is needed.


       $dvi_previewer_landscape ["start xdvi %O %S"]
              The  command  to  invoke  a  dvi-previewer  in  landscape  mode.
              [Default is "start" under MS-WINDOWS; under more recent versions
              of Windows, this will cause to be run whatever command the  sys-
              tem has associated with .dvi files.]

       $dvipdf ["dvipdf %O %S %D"]
              Command to convert dvi to pdf file.  A common reconfiguration is
              to use the dvipdfm command, which needs its arguments in a  dif-
              ferent order:

                   $dvipdf = "dvipdfm %O -o %D %S";

              WARNING:  The  default  dvipdf  script  generates pdf files with
              bitmapped fonts, which do not look good when viewed by acroread.
              That  script  should  be  modified to give dvips the options "-P
              pdf" to ensure that type 1 fonts are used in the pdf file.

       $dvips ["dvips %O -o %D %S"]
              The program to used as a filter to convert a .dvi file to a  .ps
              file.   If pdf is going to be generated from pdf, then the value
              of the $dvips_pdf_switch -- see below -- will be included in the
              options substituted for "%O".

       $dvips_landscape ["dvips -tlandscape %O -o %D %S"]
              The  program to used as a filter to convert a .dvi file to a .ps
              file in landscape mode.

       $dvips_pdf_switch ["-P pdf"]
              Switch(es) for dvips program when pdf file is  to  be  generated
              from ps file.

       $dvips_silent_switch ["-q"]
              Switch(es) for dvips program when silent mode is on.

       $dvi_update_command [""]
              When  the  dvi  previewer is set to be updated by running a com-
              mand, this is the command that is run.  See the information  for
              the variable $dvi_update_method for further information, and see
              information on the variable $pdf_update_method  for  an  example
              for the analogous case of a pdf previewer.



                                 30 March 2012                              25





LATEXMK(1L)                                                        LATEXMK(1L)


       $dvi_update_method [2 under UNIX, 1 under MS-Windows]
              How  the  dvi  viewer  updates its display when the dvi file has
              changed.    The   values   here    apply    equally    to    the
              $pdf_update_method and to the $ps_update_method variables.
                  0 => update is automatic,
                  1=> manual update by user, which may only mean a mouse click
              on the viewer's window or may mean a more serious action.
                  2 => Send the  signal,  whose  number  is  in  the  variable
              $dvi_update_signal.   The  default  value under UNIX is suitable
              for xdvi.
                  3 => Viewer cannot do an update, because it locks the  file.
              (As with acroread under MS-Windows.)
                  4  => run a command to do the update.  The command is speci-
              fied by the variable $dvi_update_command.

              See information on the variable $pdf_update_method for an  exam-
              ple of updating by command.

       $dvi_update_signal  [Under  UNIX:  SIGUSR1, which is a system-dependent
       value]
              The number of the signal that is sent to the dvi viewer when  it
              is  updated  by  sending  a signal -- see the information on the
              variable $dvi_update_method.   The  default  value  is  the  one
              appropriate for xdvi on a UNIX system.

       $failure_cmd [undefined]
              See the documentation for $compiling_cmd.

       $fdb_ext ["fdb_latexmk"]
              The  extension  of the file which latexmk generates to contain a
              database of information on source files.  You will not  normally
              need to change this.

       $force_mode [0]
              If  nonzero, continue processing past minor latex errors includ-
              ing unrecognized cross references.  Equivalent to specifying the
              -f option.

       @generated_exts  [(  aux  ,  bbl  , idx , ind , lof , lot , out , toc ,
       $fdb_ext )]
              This contains a list of extensions for files that are  generated
              during  a LaTeX run and that are read in by LaTeX in later runs,
              either directly or indirectly.

              This list has two uses: (a) to set  the  kinds  of  file  to  be
              deleted in a cleanup operation (with the -c, -C, -CA, -g and -gg
              options), and (b) in the determination of  whether  a  rerun  of
              (pdf)LaTeX is needed after a run that gives an error.

              (Normally, a change of a source file during a run should provoke
              a rerun.  This includes a file generated by LaTeX, e.g., an  aux
              file,  that is read in on subsequent runs.  But after a run that
              results in an error, a new run should occur until the  user  has
              made  a change in the files.  But the user may have corrected an



                                 30 March 2012                              26





LATEXMK(1L)                                                        LATEXMK(1L)


              error in a source .tex file during the run.  So latexmk needs to
              distinguish user-generated and automatically generated files; it
              determines the  automatically  generated  files  as  those  with
              extensions in the list in @generated_exts.)

              A  convenient way to add an extra extension to the list, without
              losing the already defined ones is to use a push command in  the
              line in an RC file.  E.g.,

                              push @generated_exts, "end";

              adds  the  extension  "end"  to the list of predefined generated
              extensions.  (This extension is used by the RevTeX package,  for
              example.)

       $go_mode [0]
              If  nonzero, process files regardless of timestamps, and is then
              equivalent to the -g option.

       %hash_calc_ignore_pattern
              !!!This variable is for experts only!!!

              The general rule latexmk uses for determining when an extra  run
              of  some  program  is needed is that one of the source files has
              changed.  But consider for example a latex package  that  causes
              an  encapsulated postscript file (an "eps" file) to be made that
              is to be read in on the next run.  The file contains  a  comment
              line  giving  its  creation  date and time.  On the next run the
              time changes, latex sees that the  eps  file  has  changed,  and
              therefore  reruns  latex.  This causes an infinite loop, that is
              only terminated becaues latexmk has a limit  on  the  number  of
              runs to guard against pathological situations.

              But the changing line has no real effect, since it is a comment.
              You can instruct latex to ignore the offending line as follows:

                 $hash_calc_ignore_pattern{'eps'} = '^%%CreationDate: ';

              This creates a rule for files with extension .eps about lines to
              ignore.   The left-hand side is a Perl idiom for setting an item
              in a hash.  Note that the file extension is specified without  a
              period.  The value, on the right-hand side, is a string contain-
              ing a regular expresssion.  (See documentation on Perl  for  how
              they  are  to be specified in general.)  This particular regular
              expression specifies that lines beginning with  "%%CreationDate:
              "  are  to  be  ignored  in deciding whether a file of the given
              extension .eps has changed.

              There is only one regular expression available for  each  exten-
              sion.   If you need more one pattern to specify lines to ignore,
              then you need to combine the  patterns  into  a  single  regular
              expression.   The simplest method is separate the different sim-
              ple patterns by a vertical bar character  (indicating  "alterna-
              tion" in the jargon of regular expressions).  For example,



                                 30 March 2012                              27





LATEXMK(1L)                                                        LATEXMK(1L)


                 $hash_calc_ignore_pattern{'eps'}      =     '^%%CreationDate:
              |^%%Title: ';

              causes  lines  starting  with  either  "^%%CreationDate:  "   or
              "^%%Title: " to be ignored.

              It  may happen that a pattern to be ignored is specified in, for
              example, in a system or user initialization file, and  you  wish
              to remove this in a file read later.  To do this, you use perl's
              delete function, e.g.,

                  delete $hash_calc_ignore_pattern{'eps'};


       $kpsewhich ["kpsewhich %S"]
              The program called to locate a source file when the  name  alone
              is  not  sufficient.  Most filenames used by latexmk have suffi-
              cient path information to be  found  directly.   But  sometimes,
              notably  when .bib files are found from the log file of a bibtex
              or biber run, the name of the file, but not its path  is  known.
              The program specified by $kpsewhich is used to find it.

              See  also  the  @BIBINPUTS variable for another way that latexmk
              also uses to try to locate files; it applies only in the case of
              .bib files.

       $landscape_mode [0]
              If nonzero, run in landscape mode, using the landscape mode pre-
              viewers and dvi to postscript converters.  Equivalent to the  -l
              option.  Normally not needed with current previewers.

       $latex ["latex %O %S"]
              The LaTeX processing program.  Note that as with other programs,
              you can use this variable not just to change  the  name  of  the
              program used, but also specify options to the program.  E.g.,

                                  $latex = "latex --src-specials";

       %latex_input_extensions
              This  variable specifies the extensions tried by latexmk when it
              finds that a LaTeX run resulted in an error that a file has  not
              been  found,  and  the file is given without an extension.  This
              typically happens when LaTeX commands of the  form  \input{file}
              or  \includegraphics{figure}, when the relevant source file does
              not exist.

              In this situation, latexmk searches for custom  dependencies  to
              make  the  missing  file(s),  but restricts it to the extensions
              specified by the variable %latex_input_extensions.  The  default
              extensions are 'tex' and 'eps'.

              (For  Perl experts: %latex_input_extensions is a hash whose keys
              are the extensions.  The values are  irrelevant.)   Two  subrou-
              tines  are  provided  for  manipulating  this  and  the  related



                                 30 March 2012                              28





LATEXMK(1L)                                                        LATEXMK(1L)


              variable    %pdflatex_input_extensions,    add_input_ext     and
              remove_input_ext.   They  are  used as in the following examples
              are possible lines in an initialization file:

                  remove_input_ext( 'latex', 'tex' );

              removes the extension 'tex' from latex_input_extensions

                  add_input_ext( 'latex', 'asdf' );

              add the extension 'asdf to  latex_input_extensions.   (Naturally
              with such an extension, you should have made an appropriate cus-
              tom dependency for latexmk, and should also have done the appro-
              priate  programming  in the LaTeX source file to enable the file
              to be read.  The standard extensions are handled  by  LaTeX  and
              its graphics/graphicx packages.


       $latex_silent_switch ["-interaction=batchmode"]
              Switch(es)  for the LaTeX processing program when silent mode is
              on.

              If you use MikTeX, you may prefer the results if  you  configure
              the  options  to include -c-style-errors, e.g., by the following
              line in an initialization file

                $latex_silent_switch   =   "-interaction=batchmode   -c-style-
              errors";


       $lpr ["lpr %O %S" under UNIX/LINUX, "NONE lpr" under MS-WINDOWS]
              The command to print postscript files.

              Under  MS-Windows (unlike UNIX/LINUX), there is no standard pro-
              gram for printing files.  But there are ways you can do it.  For
              example, if you have gsview installed, you could use it with the
              option "/p":

                  $lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';

              If gsview is installed in a different directory, you  will  need
              to  make the appropriate change.  Note the combination of single
              and double quotes around the name.  The  single  quotes  specify
              that  this is a string to be assigned to the configuration vari-
              able $lpr.  The double quotes are part of the string  passed  to
              the  operating  system to get the command obeyed; this is neces-
              sary because one part of the command name ("Program Files") con-
              tains a space which would otherwise be misinterpreted.

       $lpr_dvi ["NONE lpr_dvi"]
              The printing program to print dvi files.

       $lpr_pdf ["NONE lpr_pdf"]
              The printing program to print pdf files.



                                 30 March 2012                              29





LATEXMK(1L)                                                        LATEXMK(1L)


              Under  MS-Windows  you  could  set  this to use gsview, if it is
              installed, e.g.,

                  $lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p';

              If gsview is installed in a different directory, you  will  need
              to  make  the appropriate change.  Note the double quotes around
              the name: this is necessary because one part of the command name
              ("Program Files") contains a space which would otherwise be mis-
              interpreted.


       $make ["make"]
              The make processing program.


       $makeindex ["makeindex %O -o %D %S"]
              The index processing program.

       $max_repeat [5]
              The maximum number of  times  latexmk  will  run  latex/pdflatex
              before  deciding  that there may be an infinite loop and that it
              needs to bail out, rather than rerunning latex/pdflatex again to
              resolve  cross-references,  etc.   The  default value covers all
              normal cases.

              (Note that the "etc" covers a lot of  cases  where  one  run  of
              latex/pdflatex generates files to be read in on a later run.)

       $new_viewer_always [0]
              This  variable  applies  to  latexmk  only in continuous-preview
              mode.  If $new_viewer_always is 0, latexmk will check for a pre-
              viously  running  previewer on the same file, and if one is run-
              ning will not start a new one.  If  $new_viewer_always  is  non-
              zero,  this check will be skipped, and latexmk will behave as if
              no viewer is running.


       $out_dir [""]
              The directory in which output files are to be written by  a  run
              of (pdf)latex.  See also the variable $aux_dir.

              The  effect  of  this  variable  (when non-blank) is achieved by
              using the -output-directory option of (pdf)latex.   This  exists
              in  the  usual current (Dec. 2011) implementations of TeX, i.e.,
              MiKTeX and TeXLive. But it may not be present in other versions.

              Commonly, the directory specified for output files is  a  subdi-
              rectory of the current working directory.  However, if you spec-
              ify some other directory, e.g., "/tmp/foo"  or  "../output",  be
              aware  that  this  could cause problems, e.g., with makeindex or
              bibtex.  This is because modern versions of these  programs,  by
              default,  will refuse to work when they find that they are asked
              to write to a file in a directory that appears  not  to  be  the



                                 30 March 2012                              30





LATEXMK(1L)                                                        LATEXMK(1L)


              current working directory or one of its subdirectories.  This is
              part of security measures by the whole TeX system  that  try  to
              prevent malicious or errant TeX documents from incorrectly mess-
              ing with a user's files.  If for $out_dir or $aux_dir you really
              do  need to specify an absolute pathname (e.g., "/tmp/foo") or a
              path (e.g., "../output") that includes a higher-level directory,
              then  you  need to disable the security measures (and assume any
              risks).  This can be done by temporarily setting  the  operating
              system's  environment variable openout_any to "a" (as in "all"),
              to override the default "paranoid" setting.


       $pdf_mode [0]
              If zero, do NOT generate a pdf  version  of  the  document.   If
              equal  to 1, generate a pdf version of the document using pdfla-
              tex.  If equal to 2, generate a pdf version of the document from
              the ps file, by using the command specified by the $ps2pdf vari-
              able.  If equal to 3, generate a pdf  version  of  the  document
              from the dvi file, by using the command specified by the $dvipdf
              variable.

              Equivalent to the -pdf-, -pdf, -pdfdvi, -pdfps options.


       $pdflatex ["pdflatex %O %S"]
              The LaTeX processing program in the version  that  makes  a  pdf
              file instead of a dvi file.

              An example of the use of this variable is to arrange for xelatex
              to be used instead of pdflatex, when you could set

                   $pdflatex = "xelatex %O %S";

              Note that xelatex only produces .pdf files (and not .dvi), so to
              use  it  you will also need to turn on production of .pdf files,
              and to turn off the production of .dvi (and .ps)  files,  either
              by  command line options or by the following settings in an ini-
              tialization file

                  $pdf_mode = 1; $postscript_mode = $dvi_mode = 0;



       %pdflatex_input_extensions
              This variable specifies the extensions tried by latexmk when  it
              finds  that  a pdfLaTeX run resulted in an error that a file has
              not been found, and the file  is  given  without  an  extension.
              This   typically   happens  when  LaTeX  commands  of  the  form
              \input{file}  or  \includegraphics{figure},  when  the  relevant
              source file does not exist.

              In  this  situation, latexmk searches for custom dependencies to
              make the missing file(s), but restricts  it  to  the  extensions
              specified   by  the  variable  %pdflatex_input_extensions.   The



                                 30 March 2012                              31





LATEXMK(1L)                                                        LATEXMK(1L)


              default extensions are 'tex', 'pdf', 'jpg, and 'png'.

              (For Perl experts: %pdflatex_input_extensions is  a  hash  whose
              keys  are the extensions.  The values are irrelevant.)  Two sub-
              routines are provided for  manipulating  this  and  the  related
              variable      %latex_input_extensions,     add_input_ext     and
              remove_input_ext.  They are used as in  the  following  examples
              are possible lines in an initialization file:

                  remove_input_ext( 'pdflatex', 'tex' );

              removes the extension 'tex' from pdflatex_input_extensions

                  add_input_ext( 'pdflatex', 'asdf' );

              add  the  extension  'asdf to pdflatex_input_extensions.  (Natu-
              rally with such an extension, you should have made an  appropri-
              ate custom dependency for latexmk, and should also have done the
              appropriate programming in the LaTeX source file to  enable  the
              file  to be read.  The standard extensions are handled by pdfla-
              tex and its graphics/graphicx packages.)


       $pdflatex_silent_switch ["-interaction=batchmode"]
              Switch(es) for the pdflatex program (specified in  the  variable
              $pdflatex when silent mode is on.

              If  you  use MikTeX, you may prefer the results if you configure
              the options to include -c-style-errors, e.g., by  the  following
              line in an initialization file

                $latex_silent_switch   =   "-interaction=batchmode   -c-style-
              errors";


       $pdf_previewer ["start acroread %O %S"]
              The command to invoke a pdf-previewer.

              On MS-WINDOWS, the default is changed  to  "cmd  /c  start  """;
              under more recent versions of Windows, this will cause to be run
              whatever command the system has associated with .pdf files.  But
              this  may  be  undesirable if this association is to acroread --
              see the notes in the explanation of the -pvc option.]

              On OS-X the default is changed to "open %S",  which  results  in
              OS-X  starting up (and detaching) the viewer associated with the
              file.  By default, for pdf files this association is  to  OS-X's
              preview, which is quite satisfactory.

              WARNING: Potential problem under MS-Windows: if acroread is used
              as the pdf previewer, and it is actually viewing a pdf file, the
              pdf file cannot be updated.  Thus makes acroread a bad choice of
              previewer if you use latexmk's previous-continuous mode  (option
              -pvc)   under  MS-windows.   This  problem  does  not  occur  if



                                 30 March 2012                              32





LATEXMK(1L)                                                        LATEXMK(1L)


              ghostview, gv or gsview is used to view pdf files.

              Important note: Normally you will want to have a  previewer  run
              detached, so that latexmk doesn't wait for the previewer to ter-
              minate before continuing its work.  So normally you should  pre-
              fix  the  command  by  "start  ", which flags to latexmk that it
              should do the detaching of the  previewer  itself  (by  whatever
              method  is  appropriate to the operating system).  But sometimes
              letting latexmk do the detaching is not appropriate (for a vari-
              ety  of non-trivial reasons), so you should put the "start " bit
              in yourself, whenever it is needed.


       $pdf_update_command [""]
              When the pdf previewer is set to be updated by  running  a  com-
              mand,  this is the command that is run.  See the information for
              the variable $pdf_update_method.

       $pdf_update_method [1 under UNIX, 3 under MS-Windows]
              How the pdf viewer updates its display when  the  pdf  file  has
              changed.  See the information on the variable $dvi_update_method
              for the codes.  (Note that information needs be changed slightly
              so  that for the value 4, to run a command to do the update, the
              command is specified by the  variable  $pdf_update_command,  and
              for  the  value  2,  to  specify update by signal, the signal is
              specified by $pdf_update_signal.)

              Note that acroread under MS-Windows (but not UNIX) locks the pdf
              file, so the default value is then 3.

              Arranging to use a command to get a previewer explicitly updated
              requires three variables to be set.  For example:

                  $pdf_previewer = "start xpdf -remote %R %O %S";
                  $pdf_update_method = 4;
                  $pdf_update_command = "xpdf -remote %R -reload";

              The first setting arranges for the xpdf program to  be  used  in
              its  "remote server mode", with the server name specified as the
              rootname of the TeX  file.   The  second  setting  arranges  for
              updating to be done in response to a command, and the third set-
              ting sets the update command.


       $pdf_update_signal [Under UNIX: SIGHUP,  which  is  a  system-dependent
       value]
              The  number of the signal that is sent to the pdf viewer when it
              is updated by sending a signal -- see  the  information  on  the
              variable  $pdf_update_method.   The  default  value  is  the one
              appropriate for gv on a UNIX system.

       $pid_position[1 under UNIX, -1 under MS-Windows]
              The variable $pid_position is used  to  specify  which  word  in
              lines  of  the output from $pscmd corresponds to the process ID.



                                 30 March 2012                              33





LATEXMK(1L)                                                        LATEXMK(1L)


              The first word in the line is numbered 0.  The default value  of
              1 (2nd word in line) is correct for Solaris 2.6 and Linux.  Set-
              ting the variable to -1 is used to indicate that $pscmd  is  not
              to be used.

       $postscript_mode [0]
              If  nonzero,  generate  a  postscript  version  of the document.
              Equivalent to the -ps option.

              If some other request is made for which  a  postscript  file  is
              needed, then $postscript_mode will be set to 1.

       $preview_continuous_mode [0]
              If  nonzero,  run a previewer to view the document, and continue
              running latexmk to keep .dvi up-to-date.  Equivalent to the -pvc
              option.   Which  previewer is run depends on the other settings,
              see the command line options -view=, and the variable $view.

       $preview_mode [0]
              If nonzero, run a previewer to preview the document.  Equivalent
              to  the -pv option.  Which previewer is run depends on the other
              settings, see the command line options -view=, and the  variable
              $view.

       $printout_mode [0]
              If  nonzero, print the document using lpr.  Equivalent to the -p
              option.  This is recommended not to be set from an RC file, oth-
              erwise you could waste lots of paper.

       $print_type = ["ps"]
              Type  of  file  to  printout:  possibilities  are "dvi", "none",
              "pdf", or "ps".

       $pscmd Command used to get all the processes currently run by the user.
              The  -pvc  option  uses  the  command  specified by the variable
              $pscmd to determine if there is an  already  running  previewer,
              and  to  find  the process ID (needed if latexmk needs to signal
              the previewer about file changes).

              Each line of the output of this command is assumed to correspond
              to  one  process.   See  the  $pid_position variable for how the
              process number is determined.

              The default for pscmd is  "NONE"  under  MS-Windows  and  cygwin
              (i.e.,  the  command  is  not  used),  "ps  --width  200  -f  -u
              $ENV{USER}" under linux, "ps -ww  -u  $ENV{USER}"  under  darwin
              (Macintosh  OS-X), and "ps -f -u $ENV{USER}" under other operat-
              ing systems (including other flavors of UNIX).  In these  speci-
              fications "$ENV{USER}" is substituted by the username.

       $ps2pdf ["ps2pdf %O %S %D"]
              Command to convert ps to pdf file.





                                 30 March 2012                              34





LATEXMK(1L)                                                        LATEXMK(1L)


       $ps_filter [empty]
              The postscript file filter to be run on the newly produced post-
              script file before other processing.  Equivalent  to  specifying
              the -pF option.

       $ps_previewer ["start gv %O %S", but "start %O %S" under MS-WINDOWS]
              The  command  to  invoke a ps-previewer.  (The default under MS-
              WINDOWS will cause to be run whatever  command  the  system  has
              associated with .ps files.)

              Note  that  gv  could be used with the -watch option updates its
              display whenever the postscript file changes, whereas  ghostview
              does  not.  However, different versions of gv have slightly dif-
              ferent ways of writing this  option.   You  can  configure  this
              variable apppropriately.

              WARNING: Linux systems may have installed one (or more) versions
              of gv under different names, e.g.,  ggv,  kghostview,  etc,  but
              perhaps not one called gv.

              Important  note:  Normally you will want to have a previewer run
              detached, so that latexmk doesn't wait for the previewer to ter-
              minate  before continuing its work.  So normally you should pre-
              fix the command by "start ", which  flags  to  latexmk  that  it
              should  do  the  detaching  of the previewer itself (by whatever
              method is appropriate to the operating system).   But  sometimes
              letting latexmk do the detaching is not appropriate (for a vari-
              ety of non-trivial reasons), so you should put the "start "  bit
              in yourself, whenever it is needed.


       $ps_previewer_landscape  ["start  gv  -swap  %O  %S", but "start %O %S"
       under MS-WINDOWS]
              The command to invoke a ps-previewer in landscape mode.

       $ps_update_command [""]
              When the postscript previewer is set to be updated by running  a
              command,  this  is the command that is run.  See the information
              for the variable $ps_update_method.

       $ps_update_method [0 under UNIX, 1 under MS-Windows]
              How the postscript viewer updates its display when the  ps  file
              has    changed.    See   the   information   on   the   variable
              $dvi_update_method for the codes.  (Note that information  needs
              be changed slightly so that for the value 4, to run a command to
              do  the  update,  the  command  is  specified  by  the  variable
              $ps_update_command,  and  for  the value 2, to specify update by
              signal, the signal is specified by $ps_update_signal.)


       $ps_update_signal [Under UNIX:  SIGHUP,  which  is  a  system-dependent
       value]
              The  number of the signal that is sent to the pdf viewer when it
              is updated by sending a signal --  see  $ps_update_method.   The



                                 30 March 2012                              35





LATEXMK(1L)                                                        LATEXMK(1L)


              default value is the one appropriate for gv on a UNIX system.


       $pvc_view_file_via_temporary [1]
              The same as $always_view_file_via_temporary, except that it only
              applies in preview-continuous mode (-pvc option).


       $quote_filenames [1]
              This specifies whether substitutions for placeholders in command
              specifications  (as  in  $pdflatex)  are  surrounded  by  double
              quotes.  If this variable is 1 (or any other value Perl  regards
              as true), then quoting is done.  Otherwise quoting is omitted.

              The  quoting  method used by latexmk is tested to work correctly
              under UNIX systems (including Linux and Mac OS-X) and under  MS-
              Windows.   It  allows  the  use  of filenames containing special
              characters, notably spaces.  (But note  that  many  versions  of
              LaTeX  and  PdfLaTeX  cannot correctly deal with TeX files whose
              names contain spaces.  Latexmk's quoting only ensures that  such
              filenames are correctly treated by the operating system in pass-
              ing arguments to programs.)

       $recorder [0]
              Whether to use the -recorder option to latex and  pdflatex.  Use
              of  this option results in a file of extension .fls containing a
              list of the files that these programs  have  read  and  written.
              Latexmk  will  then  use  this  file to improve its detection of
              source files and generated files after a run of latex or  pdfla-
              tex.

              It  is generally recommended to use this option (or to configure
              the $recorder  variable  to  be  on.)   But  it  only  works  if
              (pdf)latex supports the -recorder option, which is true for most
              current implementations

              Note about the name of the .fls file:  Most  implementations  of
              (pdf)latex  produce  an  .fls file with the same basename as the
              main document's LaTeX, e.g., for Document.tex, the .fls file  is
              Document.fls.   However,  some  implementations  instead produce
              files named for the program, i.e.,  latex.fls  or  pdflatex.fls.
              In  this  second  case,  latexmk  copies the latex.fls or pdfla-
              tex.fls to a file with the basename of the main LaTeX  document,
              e.g., Document.fls.


       $search_path_separator [See below for default]
              The character separating paths in the environment variables TEX-
              INPUTS, BIBINPUTS, and BSTINPUTS.  This variable is mainly  used
              by  latexmk when the -outdir, -output-directory, -auxdir, and/or
              -aux-directory options are used.  In that case latexmk needs  to
              communicate  appropriately  modified  search  paths  to $bibtex,
              dvipdf, dvips, and (pdf)latex.




                                 30 March 2012                              36





LATEXMK(1L)                                                        LATEXMK(1L)


              [Comment to technically savvy readers: (pdf)latex doesn't  actu-
              ally  need  the  modified  search  path,  because it corrects it
              internally.  But, surprisingly, dvipdf  and  dvips  do,  because
              sometimes  graphics  files  get  generated  in the output or aux
              directories.]

              The default under MSWin and Cygwin is ';'  and  under  UNIX-like
              operating  systems  (including Linux and OS-X) is ':'.  Normally
              the defaults give correct behavior.  But there can be  difficul-
              ties  if  your operating system is of one kind, but some of your
              software is running under an emulator  for  the  other  kind  of
              operating  system;  in that case you'll need to find out what is
              needed, and set $search_path_separator  explicitly.   (The  same
              goes,  of  course, for unusual operating systems that are not in
              the MSWin, Linux, OS-X, Unix collection.)


       $sleep_time [2]
              The time to sleep (in seconds) between checking for source  file
              changes when running with the -pvc option.  This is subject to a
              minimum of one second delay, except  that  zero  delay  is  also
              allowed.

              A  value  of  exactly 0 gives no delay, and typically results in
              100% CPU usage, which may not be desirable.

       $texfile_search [""]
              This is an obsolete variable,  replaced  by  the  @default_files
              variable.

              For   backward   compatibility,  if  you  choose  to  set  $tex-
              file_search, it is a string of  space-separated  filenames,  and
              then latexmk replaces @default_files with the filenames in $tex-
              file_search to which is added "*.tex".


       $success_cmd [undefined]
              See the documentation for $compiling_cmd.


       $tmpdir [See below for default]
              Directory to store temporary files  that  latexmk  may  generate
              while running.

              The  default  under  MSWindows  (including  cygwin),  is  to set
              $tmpdir to the value of the first of  whichever  of  the  system
              environment  variables  TMPDIR  or TEMP exists, otherwise to the
              current directory.  Under other operating systems  (expected  to
              be  UNIX/Linux, including OS-X), the default is the value of the
              system environment  variable  TMPDIR  if  it  exists,  otherwise
              "/tmp".

       $use_make_for_missing_files [0]
              Whether to use make to try and make files that are missing after



                                 30 March 2012                              37





LATEXMK(1L)                                                        LATEXMK(1L)


              a run of latex or pdflatex, and for which  a  custom  dependency
              has  not been found.  This is generally useful only when latexmk
              is used as part of a bigger project which is built by using  the
              make program.

              Note that once a missing file has been made, no further calls to
              make will be made on a subsequent run of latexmk to  update  the
              file.   Handling  this  problem is the job of a suitably defined
              Makefile.  See the section "USING latexmk WITH make" for how  to
              do  this.   The intent of calling make from latexmk is merely to
              detect dependencies.

       $view ["default"]
              Which kind of file is to be previewed if a  previewer  is  used.
              The  possible  values  are  "default",  "dvi", "ps", "pdf".  The
              value of "default" means that the "highest" of the kinds of file
              generated is to be used (among dvi, ps and pdf).


CUSTOM DEPENDENCIES
       In  any RC file a set of custom dependencies can be set up to convert a
       file with one extension to a file with another.  An example use of this
       would be to allow latexmk to convert a .fig file to .eps to be included
       in the .tex file.

       The old method of configuring latexmk was to  directly  manipulate  the
       @cus_dep_list  array  that  contains  information  defining  the custom
       dependencies.  This method still works.  But now there are  subroutines
       that  allow  convenient  manipulations  of  the custom dependency list.
       These are

           add_cus_dep( fromextension, toextension, must, subroutine )
           remove_cus_dep( fromextension, toextension )
           show_cus_dep()

       The custom dependency is a list of rules, each of which is specified as
       follow:

       from extension:
              The  extension  of the file we are converting from (e.g. "fig").
              It is specified without a period.

       to extension:
              The extension of the file we are converting to (e.g. "eps").  It
              is specified without a period.

       must:  If  non-zero,  the file from which we are converting must exist,
              if it doesn't exist latexmk will give an error message and  exit
              unless the -f option is specified.  If must is zero and the file
              we are converting from doesn't exist, then no action is taken.

       function:
              The name of the subroutine that latexmk should call  to  perform
              the  file  conversion.   The first argument to the subroutine is



                                 30 March 2012                              38





LATEXMK(1L)                                                        LATEXMK(1L)


              the base name of the file to be converted without any extension.
              The  subroutines  are declared in the syntax of Perl.  The func-
              tion should return 0 if it was successful and a  nonzero  number
              if it failed.

       It  is  invoked  whenever  latexmk detects that a run of latex/pdflatex
       needs to read a file, like a graphics file, whose extension is the  to-
       extension of a custom dependency.  Then latexmk examines whether a file
       exists with the same name, but with the  corresponding  from-extension,
       as  specified in the custom-dependency rule.  If it does, then whenever
       the destination file (the one with  the  to-extension)  is  out-of-date
       with respect to the corresponding source file.

       To  make the new destination file, the Perl subroutine specified in the
       rule is invoked, with an argument that is the base name of the files in
       question.   Simple cases just involve a subroutine invoking an external
       program; this can be done by following the  templates  below,  even  by
       those  without  knowledge of the Perl programming language.  Of course,
       experts could do something much more elaborate.

       One other item in each custom-dependency  rule  labelled  "must"  above
       specifies  how the rule should be applied when the source file fails to
       exist.

       A simple and typical example of code in an initialization rcfile is

           add_cus_dep( 'fig', 'eps', 0, 'fig2eps' );
           sub fig2eps {
               system("fig2dev -Leps $_[0].fig $_[0].eps");
           }

       The first line adds a custom  dependency  that  converts  a  file  with
       extension  "fig",  as  created  by the xfig program, to an encapsulated
       postscript file, with extension "eps".  The remaining  lines  define  a
       subroutine  that  carries out the conversion.  If a rule for converting
       "fig" to "eps" files already exists (e.g., from  a  previously  read-in
       initialization  file),  the latexmk will delete this rule before making
       the new one.

       Suppose latexmk is using this rule to convert a  file  "figure.fig"  to
       "figure.eps".   Then  it  will invoke the fig2eps subroutine defined in
       the above code with a single argument "figure", which is  the  basename
       of  each  of the files (possibly with a path component).  This argument
       is referred to by Perl as $_[0].  In the example above, the  subroutine
       uses the Perl command system to invoke the program fig2dev.  The double
       quotes around the string are a Perl idiom that signify that each string
       of  the  form  of a variable name, $_[0] in this case, is to be substi-
       tuted by its value.

       If the return value of the subroutine is non-zero,  then  latexmk  will
       assume  an  error  occurred during the execution of the subroutine.  In
       the above example, no explicit return value is given, and  instead  the
       return  value  is  the value returned by the last (and only) statement,
       i.e., the invocation of system, which returns the value 0 on success.



                                 30 March 2012                              39





LATEXMK(1L)                                                        LATEXMK(1L)


       If you use filenames with spaces in them, and if your LaTeX system  and
       all  other  relevant software correctly handle such filenames, then you
       could put single quotes around filenames in the command  line  that  is
       executed:

           add_cus_dep( 'fig', 'eps', 0, 'fig2eps' );
           sub fig2eps {
               system("fig2dev -Lps '$_[0].fig' '$_[0].eps'");
           }

       This  causes the invocation of the fig2dev program to have quoted file-
       names; it should therefore work with filenames containing spaces.  How-
       ever, not all software deals correctly with filenames that contain spa-
       ces.  Moreover, the rules, if any, for quoting filenames  vary  between
       operating systems, command shells and individual pieces of software, so
       this code may not always work.

       If you use pdflatex instead of latex, then you will probably prefer  to
       convert  your  graphics  files  to  pdf format, in which case you would
       replace the above code in an initialization file by

           add_cus_dep( 'fig', 'pdf, 0, 'fig2pdf' );
           sub fig2pdf {
               system("fig2dev -Lpdf $_[0].fig $_[0].pdf");
           }

       If you have some general custom dependencies defined in the  system  or
       user  initialization  file,  you may find that for a particular project
       they are undesirable.  So you might want to delete the  unneeded  ones.
       For example, you remove any "fig" to "eps" rule by the line

           remove_cus_dep( 'fig', 'eps' );

       If  you  have  complicated sets of custom dependencies, you may want to
       get a listing of the custom dependencies.  This is done  by  using  the
       line

           show_cus_dep();

       in an initialization file.

       Another  example  of  a  custom  dependency  overcomes  a limitation of
       latexmk concerning index files.  The only index-file conversion  built-
       in to latexmk is from an ".idx" file written on one run of latex/pdfla-
       tex to an ".ind" file to be read in on a subsequent run.  But with  the
       index.sty package you can create extra indexes with extensions that you
       configure.  Latexmk does not know how to deduce the extensions from the
       information it has.  But you can easily write a custom dependency.  For
       example  if  your  latex  file   uses   the   command   "\newindex{spe-
       cial}{ndx}{nnd}{Special index}" you will need to convert files with the
       extension .ndx to .nnd.  The following lines in  an  initialization  RC
       file will cause this to happen:

           add_cus_dep('ndx', 'nnd', 0, 'makendx2nnd');



                                 30 March 2012                              40





LATEXMK(1L)                                                        LATEXMK(1L)


           sub makendx2nnd {
               system("makeindex -o $_[0].nnd $_[0].ndx");
           }

       (You  will need to modify this code if you use filenames with spaces in
       them, to provide correct quoting of the filenames.)

       Those of you with experience with Makefiles, will undoubtedly  be  con-
       cerned that the .ndx file is written during a run of latex/pdflatex and
       is always later than the .nnd last read in.  Thus the .nnd  appears  to
       be  perpetually out-of-date.  This situation, of circular dependencies,
       is endemic to latex, and latexmk in its current version works correctly
       with  circular dependencies.  It examines the contents of the files (by
       use of an md5 checksum), and only does a remake when the file  contents
       have actually changed.

       Of  course  if you choose to write random data to the .nnd (or and .aux
       file, etc) that changes on each new run, then you will have a  problem.
       For  real experts: See the %hash_cal_ignore_pattern if you have to deal
       with such problems.

       Glossaries can be dealt with similarly.


OLD METHOD OF DEFINING CUSTOM DEPENDENCIES
       In previous versions of latexmk, the only  method  of  defining  custom
       dependencies  was  to directly manipulate the table of custom dependen-
       cies.  This is contained in the @cus_dep_list array.  It is an array of
       strings,  and each string in the array has four items in it, each sepa-
       rated by a space, the  from-extension,  the  to-extension,  the  "must"
       item,  and the name of the subroutine for the custom dependency.  These
       were all defined above.

       An example of the old method of defining custom dependencies is as fol-
       lows.  It  is  the code in an RC file to ensure automatic conversion of
       .fig files to .eps files:

           push @cus_dep_list, "fig eps 0 fig2eps";
           sub fig2eps {
               system("fig2dev -Lps $_[0].fig $_[0].eps");
           }

       This method still works, and is equivalent to the  earlier  code  using
       the  add_cus_dep subroutine, except that it doesn't delete any previous
       custom-dependency for the  same  conversion.   So  the  new  method  is
       preferable.




USING latexmk WITH make
       This  section  is targeted only at advanced users who use the make pro-
       gram for complex projects, as for software development, with the depen-
       dencies specified by a Makefile.



                                 30 March 2012                              41





LATEXMK(1L)                                                        LATEXMK(1L)


       Now  the  basic  task  of latexmk is to run the appropriate programs to
       make a viewable version of a LaTeX document.  However, the  usual  make
       program  is not suited to this purpose for at least two reasons.  First
       is that the use of LaTeX involves circular dependencies (e.g., via .aux
       files), and these cannot be handled by the standard make program.  Sec-
       ond is that in a large document the set  of  source  files  can  change
       quite  frequently,  particularly  with included graphics files; in this
       situation keeping a Makefile  manually  updated  is  inappropriate  and
       error-prone, especially when the depedencies can be determined automat-
       ically.  Latexmk solves both of these problems robustly.

       Thus for many standard LaTeX documents latexmk can be  used  by  itself
       without  the  make program.  In a complex project it simply needs to be
       suitably configured.  A standard configuration would be to define  cus-
       tom  dependencies to make graphics files from their source files (e.g.,
       as created by the xfig program).   Custom  dependencies  are  latexmk's
       equivalent of pattern rules in Makefiles.

       Nevertheless  there  are  projects for which a Makefile is appropriate,
       and it is useful to know how to use latexmk from a Makefile.  A typical
       example  would  be  to  generate  documentation for a software project.
       Potentially the interaction with the rest of the rules in the  Makefile
       could be quite complicated, for example if some of the source files for
       a LaTeX document are generated by the project's software.

       In this section, I give a couple of examples of how latexmk can be use-
       fully  invoked  from a Makefile.  The examples use specific features of
       current versions of GNU make, which is the default on  both  linux  and
       OS-X systems.  They may need modifications for other versions of make.

       The  simplest  method  is  simply to delegate all the relevant tasks to
       latexmk, as is suitable for a straightforward LaTeX document.  For this
       a suitable Makefile is like

           .PHONY : FORCE_MAKE
           all : try.pdf
           %.pdf : %.tex FORCE_MAKE
               latexmk -pdf -dvi- -ps- $<

       (Note:  the  last  line must be introduced by a tab for the Makefile to
       function correctly!)  Naturally, if making try.pdf from its  associated
       LaTeX  file try.tex were the only task to be performed, a direct use of
       latexmk without a Makefile would normally be better.   The  benefit  of
       using  a  Makefile  for  a LaTeX document would be in a larger project,
       where lines such as the above would be only be a small part of a larger
       Makefile.

       The above example has a pattern rule for making a .pdf file from a .tex
       file, and it is defined to use latexmk in the obvious way.  There is  a
       conventional  default  target  named  "all",  with  a  prerequisite  of
       try.pdf.  So when make is invoked, by default it  makes  try.pdf.   The
       only  complication  is  that  there  may  be  many  source files beyond
       try.tex, but these aren't specified in the Makefile, so changes in them
       will  not  by  themselves  cause  latexmk  to be invoked.  Instead, the



                                 30 March 2012                              42





LATEXMK(1L)                                                        LATEXMK(1L)


       pattern rule is equipped with a "phony" prerequisite  FORCE_MAKE;  this
       has  the  effect  of causing the rule to be always out-of-date, so that
       latexmk is always run.  It is latexmk that decides whether  any  action
       is  needed,  e.g., a rerun of pdflatex.  Effectively the Makefile dele-
       gates all decisions to latexmk, while make has no knowledge of the list
       of  source  files  except for primary LaTeX file for the  document.  If
       there are, for example, graphics files to be made, these must  be  made
       by custom dependencies configured in latexmk.

       But  something  better  is  needed  in more complicated situations, for
       example, when the making of graphics files needs  to  be  specified  by
       rules  in  the  Makefile.   To do this, one can use a Makefile like the
       following:

            TARGETS = document1.pdf document2.pdf
            DEPS_DIR = .deps
            LATEXMK = latexmk -recorder -use-make -deps \
                  -e 'warn qq(In Makefile, turn off custom dependencies0;' \
                  -e '@cus_dep_list = ();' \
                  -e 'show_cus_dep();'
            all : $(TARGETS)
            $(foreach file,$(TARGETS),$(eval -include $(DEPS_DIR)/$(file)P))
            $(DEPS_DIR) :
                   mkdir $@
            %.pdf : %.tex
                   if [ ! -e $(DEPS_DIR) ]; then mkdir $(DEPS_DIR); fi
                   $(LATEXMK) -pdf -dvi- -ps- -deps-out=$(DEPS_DIR)/$@P $<
            %.pdf : %.fig
                   fig2dev -Lpdf $< $@

       (Again, the lines containing the  commands  for  the  rules  should  be
       started with tabs.)  This example was inspired by how GNU automake han-
       dles automatic dependency tracking of C source files.

       After each run of latexmk, dependency information is put in a  file  in
       the  .deps subdirectory.  The Makefile causes these dependency files to
       be read by make, which now has the full dependency information for each
       target  .pdf  file.   To make things less trivial it is specificed that
       two files document1.pdf and document2.pdf are the targets.  The  depen-
       dency files are .deps/document1.pdfP and .deps/document2.pdfP.

       There  is  now  no need for the phony prerequisite for the rule to make
       .pdf files from .tex files.  But I have added a rule to make .pdf files
       from  .fig  files produced by the xfig program; these are commonly used
       for graphics insertions in LaTeX documents.   Latexmk  is  arranged  to
       output  a  dependency  file  after each run.  It is given the -recorder
       option, which improves its detection of files generated during a run of
       pdflatex;  such  files  should  not  be in the dependency list.  The -e
       options are used to turn off all custom dependencies, and  to  document
       this.   Instead the -use-make is used to delegate the making of missing
       files to make itself.

       Suppose in the LaTeX file there is a  command  \includegraphics{graph},
       and  an xfig file "graph.fig" exists.  On a first run, pdflatex reports



                                 30 March 2012                              43





LATEXMK(1L)                                                        LATEXMK(1L)


       a missing file, named "graph". Latexmk succeeds in  making  "graph.pdf"
       by calling "make graph.pdf", and after completion of its work, it lists
       "fig.pdf" among the dependents of the file latexmk is making.  Then let
       "fig.fig"  be  updated,  and  then let make be run.  Make first remakes
       "fig.pdf", and only then reruns latexmk.

       Thus we now have a method by which all  the  subsidiary  processing  is
       delegated to make.


SEE ALSO
       latex(1), bibtex(1).

BUGS
       Sometimes a viewer (gv) tries to read an updated .ps or .pdf file after
       its creation is started but before the file is complete.  Work  around:
       manually refresh (or reopen) display.  Or use one of the other preview-
       ers and update methods.

       (The following isn't really a bug, but concerns  features  of  preview-
       ers.)   Preview  continuous mode only works perfectly with certain pre-
       viewers: Xdvi on UNIX/LINUX works for  dvi  files.   Gv  on  UNIX/LINUX
       works  for  both  postscript  and pdf.  Ghostview on UNIX/LINUX needs a
       manual update (reopen); it views postscript and pdf.  Gsview under  MS-
       Windows  works  for both postscript and pdf, but only reads the updated
       file when its screen is refreshed.   Acroread  under  UNIX/LINUX  views
       pdf,  but  the  file needs to be closed and reopened to view an updated
       version.  Under MS-Windows, acroread locks its input file  and  so  the
       pdf  file  cannot  be updated.  (Remedy: configure latexmk to use suma-
       trapdf instead.)

THANKS TO
       Authors of previous versions.  Many  users  with  their  feedback,  and
       especially  David  Coppit  (username david at node coppit.org) who made
       many useful suggestions that contributed  to  version  3,  and  Herbert
       Schulz.   (Please  note  that  the  e-mail addresses are not written in
       their standard form to avoid being harvested by worms and viruses.)

AUTHOR
       Current  version,  by  John   Collins   (username   collins   at   node
       phys.psu.edu).  (Version 4.31).

       Released version can be obtained from CTAN: <http://www.tug.org/tex-ar-
       chive/support/latexmk/>,    and    from    the     author's     website
       <http://www.phys.psu.edu/~collins/software/latexmk/>.
       Modifications and enhancements by Evan McLean (Version 2.0)
       Original script called "go" by David J. Musliner (RCS Version 3.2)










                                 30 March 2012                              44





LATEXMK(1L)                                                        LATEXMK(1L)



























































                                 30 March 2012                              45


